Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Marin City, CA | Milpitas Construction
We provide independent CWS service across Marin City, handling cabinet installation, refacing, and quartz or granite countertop work. What makes our CWS work different here comes down to one thing: we know how these products hold up in a damp, fog-belt microclimate where county permitting, steep hillside lots, and WWII-era framing all collide. If you’re planning a kitchen remodel or trying to decide whether to repair or replace CWS cabinets in Marin City, call (877) 752-4194 and we’ll give you a straight answer and a free estimate.
Why Marin City Residents Choose Us for CWS Service
We’re a full-scope general contractor, not a cabinet-only shop. That matters in Marin City because a kitchen project here rarely stops at the cabinets. The same house might need a joist sistered, a wall shimmed, or a drainage line rerouted before the new CWS run goes in. Ken Stafford, who leads our team, grew up around Milpitas and came up through construction technology training at Evergreen Valley College before spending two-plus decades on Bay Area remodels and ground-up builds. He’s the one who taught us to spec materials by name, so you know exactly what’s going into your home.
We’re also independent, and that’s on purpose. We are not affiliated with or authorized by CWS. Our only loyalty is to the fit, finish, and moisture detailing in your Marin City kitchen. That means we recommend a plywood-core CWS cabinet where it makes sense, and we’ll tell you when a swollen particleboard box isn’t worth refacing. For CWS sales & service questions, we’re the crew that’ll talk you through the trade-offs without pushing a full gut when a targeted repair will do.
Styles & brands we work with
Common CWS Construction Problems We Solve in Marin City
- Thermofoil door faces peeling at the edges. CWS raised-panel thermofoil doors delaminate when damp air works its way under the vinyl layer. In Marin City, that damp air is constant, especially on walls facing Richardson Bay fog. We replace the affected door faces with OEM or better-matched aftermarket faces and adjust the cabinet alignment so the edges stop rubbing.
- Swollen sink base cabinets from below-grade moisture. Many Marin City kitchens sit low to the ground or on slabs where moisture wicks up through the toe kick. Particleboard boxes swell, jam drawers, and soften hinges. We swap the damaged boxes for all-plywood CWS cabinet lines and add a sealed toe kick so winter runoff and condensation stop finding the cabinet interior.
- Quartz and granite seams failing at the undermount sink. The original install may have skipped proper silicone bedding. Fog-cycle condensation creeps under the counter edge, loosens the seam, and eventually causes the sink cutout to fail. We re-bed the countertop with a continuous silicone bead and mechanical support brackets where the opening spans more than 24 inches.
- Cabinet doors racking on out-of-plump walls. Older CWS cabinet runs in Marin City’s war-worker housing were hung on walls that weren’t flat to begin with. Add seasonal soil movement on the hillsides and doors start to rub and bind. We shim the boxes, reset the hinge plates, and align the drawer glides so everything closes without forcing it.
- Drawer glides and soft-close hardware wearing out from hard daily use. CWS drawer boxes hold up, but the original glides were never the strongest link. We source OEM CWS hinges and glides when the box is sound, and spec quality aftermarket soft-close hardware when OEM parts are discontinued or priced out of sense. You don’t need a full replacement run for one sticky drawer.
CWS Service in Marin City: What Local Conditions Mean for Your Equipment
Here’s the thing most outside contractors don’t get about Marin City: it’s an unincorporated county island surrounded by Sausalito CWS service territory, and nearly everything here runs through Marin County rather than a city building department. That sounds like a paperwork footnote, but it changes how a CWS cabinet or countertop job actually goes. A kitchen remodel off Cole Drive or Drake Avenue gets permitted through Marin County, and if the lot sits near the Sausalito line, the scope has to be documented precisely up front or the permit stalls. We’ve been through that loop enough times to know which questions the county asks before we ever order cabinets. It’s one more reason we handle the whole project under one contract instead of leaving a homeowner to sort out jurisdiction between a cabinet installer and a county plan reviewer.
CWS Models & Products We Service in Marin City
We work on CWS Shaker-style solid-wood base and wall cabinets, raised-panel thermofoil door faces, quartz and granite countertop packages, and all-plywood drawer-box cabinet lines. For repairs, we source OEM CWS hinges, drawer glides, and door faces when the box is still solid. When OEM parts are discontinued or the price doesn’t make sense, we spec aftermarket soft-close hardware from suppliers we’ve vetted over years of CWS sales & service work. We keep common hinge plates, glides, and silicone bedding materials stocked so most Marin City repairs don’t wait on a warehouse shipment.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Marin City
What you’ll pay depends on whether we’re repairing, refacing, or replacing your CWS cabinets, and whether the countertop needs re-bedding or full replacement. Here’s where jobs typically land:
| Service | Typical Marin City Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Moisture-related box replacement and hillside shimming can push a job toward the upper end, and that’s normal here. We quote line items in writing so you see exactly what you’re paying for. Questions about a specific scope? Call (877) 752-4194 and we’ll walk you through it, free.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Marin City
In most cases, a straight cabinet replacement with no structural, plumbing, or electrical changes doesn’t require a permit in Marin County. If the job touches a sink, gas line, or load-bearing wall, you’ll need a permit, and that comes through Marin County, not a city hall. We sort this out before any work starts so the scope is documented correctly. Call (877) 752-4194 for a free estimate and we’ll tell you exactly what your project triggers.
Thermofoil door faces peel when moisture gets between the vinyl layer and the MDF core, and the fog off Richardson Bay keeps humidity high enough to accelerate that failure on bay-facing walls. The fix is replacing the affected door faces and improving the seal around the cabinet run so damp air stops sitting against the edges. We see this most often in Marin City kitchens where the original install didn’t account for the marine layer.
Yes, and we do it by bringing physical samples from Cambria, Silestone, and Caesarstone into your Marin City kitchen rather than guessing from a swatch online, the same way we handle CWS repair in Belvedere. The fog-light here is gray and diffuse, so a color that looks right under showroom lighting can read completely different in your house. We spec the countertop to match your existing CWS cabinet finish under Marin City’s actual light conditions.
That depends entirely on the box. If the cabinet boxes are plywood or a solid composite and haven’t swollen, refacing with new CWS door faces and drawer fronts makes sense and saves thousands compared to a full replacement. If the boxes are particleboard and have wicked moisture near the toe kick or sink base, refacing is wasted money, and we’ll tell you that directly. On a fog-belt home up off Drake Avenue, similar to what we see with Tiburon CWS service calls, we pulled a CWS thermofoil run where the door faces had peeled and the sink base had swollen from years of damp air funneling down the hillside. We replaced the water-damaged boxes with plywood-core CWS cabinets, re-bedded a quartz countertop over a new undermount sink with proper silicone, and added a sealed toe kick. That’s the difference between a repair that lasts and a reface that fails in two winters.
Storm runoff from the steeper slopes above Cole Drive can funnel straight toward lower-lying homes and find its way into a kitchen at the foundation line. For a CWS cabinet install, that means we check drainage patterns, grade the area around the kitchen wall if needed, and seal the toe kick so winter rains don’t wick into the cabinet boxes. Skipping that step is how you end up replacing swollen sink bases two years after a remodel. Call (877) 752-4194 and we’ll take a look before you spend a dollar on cabinets.
Service Areas Near Marin City
We serve Marin City and the surrounding unincorporated pockets along the 101 corridor. You’ll also find us doing CWS work in San Juan Bautista and Castroville, where the older housing stock creates similar cabinet and moisture challenges. See our Marin City service area page for full coverage details, or check out CWS service in San Juan Bautista and CWS service in Castroville if you’re working on a property further south.
Book Your CWS Service in Marin City Today
Whether you need one cabinet box replaced or a full kitchen remodel through Marin County permitting, we’ll give you a straight answer and a written line-item quote. Call (877) 752-4194 to schedule your free estimate. Build it right the first time, the Bay Area doesn’t give you a free pass on shortcuts.
Written by Ken Stafford, Owner at Milpitas Construction, serving Marin City and the surrounding Bay Area.