Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Tiburon, CA | Milpitas Construction
We install and service Mr-Glass shower enclosures, glass panels, and glazed openings across Tiburon as an independent construction crew. Homeowners call us because we understand that glass work here is not just about the panel, it’s about the slope, the salt air, and the foundation moving under it. Mr-Glass products are well-built, but Tiburon tests them harder than most places. Call (877) 752-4194 for a free estimate.
We are Mr-Glass sales & service specialists who work directly for homeowners, and we are not a manufacturer-authorized or affiliated dealer. What we bring to Tiburon is years of fitting frameless glass into out-of-plumb, out-of-square hillside homes where a stock panel almost never drops in clean. That matters more here than anywhere else in Marin.
Why Tiburon Residents Choose Us for Mr-Glass Service
Tiburon homes are not like the tract houses over the hill. They’re built into slopes, exposed to bay wind, and old enough that nearly every wall has drifted a degree or two out of square. That means Mr-Glass installation here is a custom job whether the box says “standard” or not. Ken Stafford, who owns Milpitas Construction, grew up around the Bay Area’s quirks, and he built this company around one idea: measure the house, not just the opening. For General Contractor in Tiburon work, that approach is essential.
We spec materials by name, so you know exactly what’s going into your home. For Mr-Glass enclosures, that means OEM hinges, sweeps, and seals where they are still available, and marine-grade stainless aftermarket hardware where the original parts would corrode again in a season. We do not guess at glass thickness or hinge weight ratings. We check the wall, the curb, and the floor before we order anything.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Tiburon
Here are the Mr-Glass failure modes we see repeatedly across Tiburon service area homes, and what is usually behind each one:
- Corroded hinges, pivots, and handle hardware. Salt air off Richardson Bay attacks plated hardware long before the glass shows wear. The door gets stiff, then loose, then the hinge pin seizes. We replace with marine-grade stainless where OEM parts have already failed once.
- Door drag and failed sweeps after a wet winter. Pier-and-grade foundations in old Tiburon and Belvedere move seasonally. The clay soil swells, the floor shifts, and a Mr-Glass door that closed cleanly in August drags on the curb by February. Re-hanging the door only works if the curb and wall are re-checked first.
- Persistent gap at the sweep, water tracking onto the bathroom floor. In older hillside cottages, out-of-plumb walls and out-of-level curbs mean a stock panel will not sit flush. The symptom is water on the floor, but the fix is re-templating the glass to the actual wall, not the one in the original drawings.
- Cloudy glass edges and degraded sealant. Marine-layer humidity and under-ventilated bathrooms let moisture sit against the wall behind the enclosure. The sealant fails, the edge clouds, and the wall framing behind the glass starts to soften. We pull the panel, dry the wall, and re-set it properly.
- Hardware that fails while the glass is still fine. This is the good news case. When only the hinges or handles have given out, we repair rather than replace. It’s a smaller bill and a faster job, and we will tell you honestly when repair is the right call.
Mr-Glass Service in Tiburon: What Local Conditions Mean for Your Equipment
On Belvedere and Tiburon hillside streets, lots are so steep that there is often no driveway access to the bathroom side of the house. That is not a scheduling footnote. It is the first thing we plan around. Mr-Glass glass panels have to be walked in by hand or craned over the roof, and because neighbors’ and coastal views are protected, even a second-story bath addition that changes a sightline can trigger Town of Tiburon or Belvedere design review before glass is ordered. We measure and pre-cut every panel before it leaves the truck, because there is no re-cutting a piece on a slope with no staging room.
This is not true in Mill Valley or Corte Madera. It is unique to the peninsula’s steepest streets, and it changes how we bid, schedule, and stage a Mr-Glass job. On a hillside street in Old Tiburon, a homeowner’s Mr-Glass frameless enclosure had a door that dragged and a sweep that no longer touched the curb. The pier-and-grade floor had shifted after a wet winter, and the original glass was cut to a wall that was no longer plumb. We hand-carried a re-templated 3/8 in. panel up the exterior stairs, reset the curb, and re-hung the door with marine-grade stainless pivots and a new sweep so it sealed through the next rainy season. Because there was no driveway, the replacement glass came up by hand, not on a truck bed. That’s what Home Remodeling in Tiburon looks like for Mr-Glass service.
Mr-Glass Models & Products We Service in Tiburon
We work on the Marin City Mr-Glass service and Tiburon product lines most common in local bathrooms: frameless hinged shower enclosures in 3/8 in. and 1/2 in. tempered glass, semi-frameless sliding shower doors, neo-angle and corner shower enclosures, and custom-cut tempered glass panels and shelves. For parts, we use OEM Mr-Glass hinges, sweeps, and seals where they are still available for the enclosure, and quality aftermarket marine-grade stainless hardware where OEM parts are discontinued or where the salt-air environment calls for better corrosion resistance.
When only the hardware has failed, we repair it. When the glass is chipped, clouded at the edge, or the opening itself has moved out of square, we tell the homeowner honestly that a re-templated replacement is the better spend. We stock common hinge and sweep sizes locally for faster Tiburon turnaround, and we bring glass cut to spec, not cut on-site.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Tiburon
Here is what Mr-Glass in Chinatown and Tiburon-related work typically runs. The spread depends on glass thickness, hardware grade, and whether the existing curb and walls need re-leveling before the panel goes in.
| Service | Typical Range in Tiburon |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
The cost drivers in Tiburon are access, foundation condition, and hardware choice. A ground-floor bathroom with a flat floor and driveway access lands at the lower end. A hillside bathroom with no staging room and a curb that needs re-setting lands higher. Every estimate is free, and we give a written line-item quote before any work starts. Call (877) 752-4194 to schedule yours.
Serving Tiburon, CA — Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Tiburon
Yes, but not with a stock panel. The glass has to be re-templated to the actual wall and curb position, not the original measurements, and in many cases the curb itself needs re-setting before the panel is hung. We do this regularly in Belvedere. The job just takes measurement and fabrication time that a flat-floor house never needs. Call (877) 752-4194 for an assessment.
Yes. Hinges, pivots, and handles on Mr-Glass enclosures corrode measurably faster within a few blocks of the water than they do inland. Plated OEM hardware often fails within a few years in Tiburon where the same part would last a decade in Novato. We recommend marine-grade stainless replacements when the original hardware has already failed once.
It can. If the addition changes a sightline, the Town of Tiburon or Belvedere design review may need to sign off before we order glass. We flag this early in the project so the enclosure is not sitting in a crate while the review process runs. For an exact timeline on your project, call (877) 752-4194 and we will map it out.
By hand or by crane, depending on the lot. We pre-cut and pre-templet every panel before it leaves the truck, then walk it up the slope or crane it over the roof. There is no on-site cutting on a hillside with no staging room, and we never treat access as an afterthought because in Tiburon it is the job.
Usually yes. The cottages in Old Tiburon have narrow bathrooms where a tub eats space, and a Mr-Glass semi-frameless or frameless enclosure opens the room up. The catch is the walls and floor: older cottages are rarely plumb, so the glass needs to be templated to the actual conditions. We handle that as part of the conversion, and typical Tiburon pricing runs $3,500 to $10,000. Call (877) 752-4194 for an exact quote, estimates are free.
Service Areas Near Tiburon
Our Mr-Glass service covers Tiburon and the surrounding communities. For reference, similar work is available from our team in Mr-Glass service in Belvedere and Mr-Glass service in Sausalito. We also take on projects in Marin City and the broader Tiburon Peninsula. Our vans stage out of the Tiburon area most days, so scheduling is flexible.
Book Your Mr-Glass Service in Tiburon Today
Build it right the first time, because the Bay Area doesn’t give you a free pass on shortcuts. If your Mr-Glass enclosure is dragging, corroding, or leaking, call (877) 752-4194 for a free estimate. We’ll measure the actual walls, the actual curb, and the actual slope before we order anything.
Written by Ken Stafford, Owner at Milpitas Construction, serving Tiburon since the company’s founding.