Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Tustin, CA | Milpitas Construction
We provide independent Jerith fencing sales, installation, and repair across Tustin and the surrounding neighborhoods. At Milpitas Construction, we’re a full-scope general contractor led by Ken Stafford, and we’ve been setting Jerith aluminum and vinyl fence lines in Tustin long enough to know the difference between an Old Town ranch lot and a Tustin Ranch HOA tract. Call (877) 752-4194 to schedule a free estimate. Jerith makes a solid ornamental fence, but Tustin’s two very different housing economies mean the install matters as much as the product line.
Tustin homeowners call us because we don’t sell fence lines we wouldn’t set on our own properties. We spec Jerith materials by name, match OEM panels and gate hardware where it’s still supported, and never push a full replacement when a repair and re-set does the job. Jerith sales & service are a core specialty for our crews, from the aluminum picket runs in central Tustin to the vinyl privacy lines out in Tustin Ranch.
Why Tustin Residents Choose Us for Jerith Service
Ken Stafford built his career on work that holds up. He got his start in construction technology at Evergreen Valley College in San Jose, where he learned blueprint reading and site management before he ever ran a paying crew. His dad was a finish carpenter who kept a tidy garage and an even tidier conscience, and Ken figures that’s where he picked up his thing about doing work you’re not embarrassed to stand behind. Twenty-plus years later, that’s the standard we bring to every Tustin service area job.
Jerith fencing isn’t complicated to buy, but it’s easy to install wrong. We see it all the time in Tustin: posts set too shallow in backfilled soil, cut ends left bare to rust, gates racked out of square within two seasons. We fix those mistakes and we avoid making them in the first place. We’re a General Contractor – Tustin with access to 50+ brand-name product lines, which means we can handle the fence and the patio, the gate and the driveway, the addition and the re-roof under one contract. When a Jerith line butts up against a new hardscape or a room addition, we coordinate the whole thing instead of handing you a list of subcontractors.
We’re an independent contractor. We are not authorized, sponsored, or endorsed by Jerith. What that means for you is simple: we recommend what works in Tustin, not what a manufacturer’s sales rep needs to move this quarter. We install Jerith because the aluminum holds up in semiarid heat better than most, and we repair Jerith because good sections shouldn’t get thrown out over a leaning post or a sagging hinge.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Tustin
Here’s what we actually see on Tustin properties, and why it happens here.
- Powder-coat chalking and fade on sun-exposed Jerith aluminum panels. West- and south-facing runs take direct afternoon sun for six months straight in Tustin’s long dry summers, and Santa Ana wind events carry fine grit that accelerates the breakdown of the factory powder coat. The panels chalk first at the top rails and post caps, then the color washes out unevenly. We touch up resealed cut ends and can advise when a full refinish is worth it versus a selective panel replacement.
- Post lean and racked panels in Old Town’s pier-and-beam-era yards. On 92780 lots, those original fences were often set into backfilled soil over old patio slabs, decomposed granite, or decades of organic fill that shifts with winter rains. We pull the panels, re-dig the footings to proper depth below the disturbed layer, re-set posts plumb, and re-hang the original Jerith panels whenever they’re still structurally sound.
- Gate sag and hinge-point wear where gates serve as side-yard access on small Old Town lots. When a Jerith aluminum gate opens twenty times a day on a compact 1950s ranch lot, the hinge bushings wear oval and the gate starts dragging on the latch side. It’s a repair, not a replacement: new hinges, re-squared frame, and the gate swings clean again.
- Rust bleed and paint failure at cut ends and welded joints. Field cuts happen on nearly every Jerith install, and if those cut ends aren’t touched up with a proper zinc-rich primer and top coat, rust works under the powder coat fast in inland heat that swings from dry Santa Ana conditions to winter rain. We see this most on gates and short panel runs that were cut to fit irregular openings.
- Vinyl privacy fence sections popping out of bottom rails in high wind events. Jerith vinyl privacy lines run hollow and interlocking, and Tustin’s Santa Ana gusts can work loose panels if the line wasn’t laid straight with proper post spacing. We fix the underlying layout problem, not just snap the panel back in and wait for the next wind event.
Jerith Service in Tustin: What Local Conditions Mean for Your Equipment
Here’s the thing nobody tells you about fencing in Tustin: the city is split by a hard mid-century fault line. The flat, older 1950s-70s ranches around Old Town in 92780 sit on small lots with pier-and-beam subfloors, original single-pane windows, and decades of un-permitted patios and additions. Tustin Ranch in 92782 is a completely different animal: 1990s-2000s Mediterranean tile-roof tract homes with attached garages, stucco-over-woodframe construction, and HOA architectural review boards that govern every fence style, height, and color.
For a Jerith fence or gate line, that split changes everything about how the job starts. On a 92780 property, you often can’t even establish the true property line without pulling city records and reconciling decades of undocumented additions and hardscape. The original concrete-slab patio might extend two feet past where the records say it should, or the side yard might have been regraded in the 1980s without a permit. That’s a records-and-layout problem that essentially never comes up in Tustin Ranch’s master-planned subdivisions, where every lot line is clean and every fence style goes through the HOA first. We handle both sides of that fault line, and we know which questions to ask before the first post hole gets dug.
Jerith Models & Products We Service in Tustin
We install and repair the full Jerith line we commonly see across Tustin, Orange, and the surrounding area:
- Jerith Industrial/Commercial-grade aluminum ornamental fence
- Jerith Regency aluminum ornamental fence
- Jerith Tri-State and other vinyl privacy fence lines
- Jerith aluminum picket and pool-code fencing with matching gates
We match Jerith OEM panels, posts, and gate hardware wherever the line is still supported. When it’s an older run and OEM parts aren’t practical to source, we substitute quality aftermarket hinges, latches, and post caps rather than junk hardware. Our honest stance: repair and re-set good Jerith sections rather than sell a full replacement, and replace panels or posts only when powder-coat failure or footing heave has compromised the structure itself.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Tustin
Here’s what Jerith fence work costs in the Tustin market. These are line-item ranges for the fence itself, not bundled with other work:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
What drives the cost in Tustin is mostly lot conditions. On a 92780 Old Town lot with un-permitted patio footprints and backfilled soil, footing work costs more than it does on a clean Tustin Ranch tract. Property line uncertainty means survey or records research time. HOA compliance in the Ranch adds a review-and-revision step. Your free estimate from us is a written line-item quote, not a phone number and a handshake. Call (877) 752-4194 to schedule yours.
Serving Tustin, CA — Our Local Coverage Area
We’re based in the Tustin area and know this community well, and we also provide Jerith in Irvine. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Tustin
The chalky fade is powder-coat breakdown from direct afternoon sun, and in Tustin it shows up on west- and south-facing runs because those panels get the longest, hottest exposure plus grit from Santa Ana wind events. We can touch up isolated sections, but if the whole run has lost its finish, a selective panel replacement or full refinish is the honest fix. Call (877) 752-4194 and we’ll tell you which option makes sense for your run.
Yes, and this is exactly the scenario we work through on 92780 lots all the time. We start by pulling city records and mapping what’s actually on the ground, then reconcile the additions before we set a single post. The fence gets set to the true property line, not the old patio edge, and the patio either gets cut back or incorporated into the layout. Call (877) 752-4194 for a free site walk of your property.
Yes, and it’s one of the most common callbacks we prevent. Tustin Ranch HOAs typically restrict fence height, color, material, and sometimes the specific panel profile. We can help you submit architectural review drawings and spec sheets for the Jerith line you want, and we won’t install anything that’ll get you a violation letter three months later. Call (877) 752-4194 and ask us what the HOA package looks like.
It’s a repair in almost every case. Gate sag on an aluminum Jerith gate is almost always hinge-point wear or a post that’s shifted out of plumb, not the gate frame itself failing. We replace the hinges, re-square the frame, and reset or reinforce the post as needed. A full gate replacement only makes sense when the frame is bent or corroded through. Call (877) 752-4194 and we’ll tell you which one you’re dealing with.
Yes, and that’s one of the reasons homeowners bring us in. When a Tustin home addition changes the footprint, the old fence line has to get reworked around the new walls, the side yard changes shape, and the gate relocation has to stay code-compliant. We coordinate the whole thing under one contract so you’re not paying a separate fence contractor to clean up after the framing crew. Call (877) 752-4194 to talk through your addition and fence scope.
Service Areas Near Tustin
Our service area covers Tustin and the surrounding communities: Jerith service in North Tustin, Jerith service in Rialto, plus nearby work in Marin City, San Juan Bautista, Castroville, Prunedale, Silver Lakes, and Piñon Hills. We’re based in the Bay Area and we bring the same full-scope approach to every fence, gate, and addition we take on.
Book Your Jerith Service in Tustin Today
On an Old Town Tustin ranch off the 92780 blocks, our crew was called out on a leaning Jerith aluminum ornamental side-yard run where the original posts had been set into backfilled soil over an old concrete patio slab that wasn’t on any city record. We pulled the panels, re-dug and re-poured the footings to proper depth, reset the posts plumb against the true property line, and touched up the cut powder-coat ends. The run is straight and the gate swings clean again without replacing a single Jerith panel. Build it right the first time – the Bay Area doesn’t give you a free pass on shortcuts.
Call (877) 752-4194 to schedule your free Jerith fence estimate in Tustin.
Written by Ken Stafford, Owner at Milpitas Construction, serving Tustin and the surrounding area.