Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Tiburon, CA | Milpitas Construction
We install and repair Belgard pavers, retaining walls, and driveways across Tiburon and the Belvedere peninsula, including Marin City Belgard service. The one thing that separates our Belgard work here from a generic paver job: nearly every hillside lot involves craned-in materials, geotechnical review, and coastal design oversight that most contractors never see. Milpitas Construction is an independent installer, not a Belgard affiliate. We earn your trust the hard way, one steep Tiburon hillside at a time. Call (877) 752-4194 for a free estimate.
Why Tiburon Residents Choose Us for Belgard Service
Ken Stafford grew up in the Bay Area and cut his teeth on construction technology at Evergreen Valley College before spending two decades on ground-up builds, additions, and remodels. He’s the kind of contractor who still quotes the same trim carpenter’s rule his old man lived by: do work you’re not embarrassed to stand behind. When it comes to Belgard sales & service, that means we know the product lines, the failure modes, and which base spec actually holds up on Tiburon’s clay slopes.
We’re a Tiburon General Contractor with access to 50+ brand-name product lines. Belgard is one of the hardscape brands we trust because its paver and wall profiles suit the look of this peninsula’s older and contemporary homes. We use Belgard’s own matching wall block, caps, and edge restraints where the profile calls for it, and quality aftermarket base aggregate and polymeric joint sand where it performs better in wet coastal conditions. We say which is which up front. No mystery mix.
From the roofline to the kitchen counter, one contractor, one conversation. That’s how we work across the Tiburon service area.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Tiburon
Here’s what actually goes wrong with Belgard hardscapes on this peninsula, based on jobs we’ve corrected:
- Salt-air corrosion and paver pitting on waterfront installs. Wind off Richardson Bay carries salt and moisture that corrodes standard fasteners and pits lower-grade pavers and joint sand. We spec marine-grade hardware and re-sand joints more often on Belvedere-facing and bayfront properties.
- Clay-soil heave and settling on steep slopes. Winter rains push water under underbuilt paver bases. When the base depth and drainage were specced for flat land, Tiburon’s clay and grade turn that into heave and settling within a few seasons. We rebuild the base, not just the surface.
- Mega-Lafitt and Weston Stone retaining walls bowing at the drainage plane. On hillside lots, clogged or missing drain gravel and weep points let hydrostatic pressure push the wall face outward. We diagnose the backfill and drainage before touching a single block.
- Edge courses walking on sloped driveway aprons. When the edge restraint wasn’t pinned for grade, pavers drift outward and open joints that then collect runoff. We see this often on older Tiburon driveways cut into the hillside.
- Mismatched repair blocks after a partial fix. A previous handyman used a different paver profile or cap. We match the exact Belgard line and color so the repair doesn’t look like a patch.
Belgard Service in Tiburon: What Local Conditions Mean for Your Equipment
Here’s the thing a generic Belgard page won’t tell you. Belvedere and Tiburon hillside lots are often so steep and driveway-less that pavers, wall block, and base material have to be walked in or craned over the house. And because protected bay views are fiercely defended here, even a low retaining wall or a modest patio can trigger design review before we ever set base. On a hillside street in Old Tiburon, our Home Remodeling in Tiburon team fixed a homeowner’s Belgard Lafitt Rustic Slab patio that had settled along the downhill edge after winter rains pushed water under a shallow base. No driveway access meant we couldn’t just back a truck up. We craned pallets of Mega-Lafitt block and base aggregate over the house, rebuilt the drainage plane and edge restraint, then reset the pavers so runoff now sheds away from the slope. That’s normal work in Tiburon. If your contractor hasn’t done it before, it shows.
Combine that access problem with salt air off Richardson Bay and clay soils that swell and shrink with the seasons, and the margin for error on base prep disappears. Weather-tight scheduling matters too: the foggy marine layer and winter rains mean joint sand and polymeric binders need dry cure windows. We schedule around that.
Belgard Models & Products We Service in Tiburon
We install and repair the Belgard lines most common on this peninsula:
- Belgard Lafitt Rustic Slab pavers for patios and walkways with a clean, modern face.
- Belgard Cambridge Cobble pavers for driveways and entries that need older-world texture.
- Belgard Mega-Lafitt retaining wall block for larger hillside walls and grade changes.
- Belgard Weston Stone wall block for low walls and terraces where a dressed-stone look fits the house.
Our parts approach is straight: Belgard OEM block, caps, and edge restraints where the profile demands it. Aftermarket base aggregate and polymeric joint sand where coastal wetness and Tiburon clay perform better with a tougher material. If a wall or patio is failing, we diagnose the base and drainage first. A sound Belgard surface is often repairable at the base rather than a full tear-out, and we’ll tell you when that’s the cheaper fix.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Tiburon
Belgard hardscape pricing on this peninsula runs higher than flatland Marin because of crane work, steep-grade base prep, and design-review time. Here are the ranges we quote most often in Tiburon:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the final number: access (crane vs. walk-in), slope and retaining needs, base depth, and whether the Town of Tiburon or Belvedere design review adds conditions. A free estimate means we walk the lot, check access and drainage, and give you a written line-item quote. No change orders hiding behind a lowball. Call (877) 752-4194 to schedule yours.
Serving Tiburon, CA — Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Tiburon
Yes, if you plan for it from the first meeting. We’ve installed Belgard in Chinatown-style patios and retaining walls on hillside lots that went through the Town of Tiburon’s design review and Belvedere’s stricter hillside and waterfront oversight. The trick is submitting drawings that address slope stability, drainage, and view protection up front. We handle that paperwork for you. Call (877) 752-4194 if you want to know what your lot would require.
We crane them over the house, or we walk them in by hand when the crane can’t reach. This is standard for us on Old Tiburon and Belvedere streets. We’ve done it enough that the scheduling and staging don’t slow your job down. The bigger issue is making sure the base and drainage are built for the slope once the material is there.
It can pit lower-grade pavers and corrode standard hardware, but Belgard’s denser pavers handle the salt better than cheaper concrete products. The weak point is usually the joint sand and any exposed fasteners or edge restraints. We re-sand more often on bayfront homes and use marine-grade hardware where it matters. That’s a maintenance reality of living close to the water.
Clay expands when wet and shrinks when dry, and on a slope that movement pushes downhill. If the base wasn’t deep enough or drainage wasn’t laid right, the pavers heave and the wall bows. We fix it by rebuilding the base to grade, adding proper drain gravel and weep points, and pinning the edge restraints. Then we reset the same Belgard pavers or blocks. Call (877) 752-4194 for an exact quote, estimates are free.
Usually yes, if the base is built for the slope and the drainage is handled. Pavers move with the ground better than a rigid concrete slab, so on clay hillsides they’re often the more forgiving choice. On a sloped entry, we pin the edge courses and spec a deeper base at the low end. It costs more than flat work, but it holds up longer. Call (877) 752-4194 if you want us to look at your drive.
Service Areas Near Tiburon
We serve Tiburon and the surrounding peninsula. Our crews also work in Marin City, Mill Valley, Sausalito, and Belvedere. If you’re across the bay or up the coast, reach out and we’ll tell you straight if we can get to you. We also provide Belgard service in Belvedere and Belgard service in Sausalito.
Book Your Belgard Service in Tiburon Today
If your Belgard patio is settling, your wall is bowing, or you’re planning a new paver driveway in Tiburon, call (877) 752-4194. We’ll walk the lot, check access and drainage, and give you a written estimate. Build it right the first time, the Bay Area doesn’t give you a free pass on shortcuts.
Written by Ken Stafford, Owner at Milpitas Construction, serving Tiburon since the start of his career in Bay Area construction.