Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Boulder Creek, CA | Milpitas Construction
We provide independent CGI cabinetry and quartz countertop installation, repair, and full kitchen remodeling across Boulder Creek and the surrounding Santa Cruz Mountains, including CGI service in Ben Lomond and nearby communities. If you’re planning a CZU rebuild or remodeling an older mountain home, the one thing that makes our CGI work different here is sequencing: we install around county fire-clearance inspections and unlevel pier-and-post foundations, not against them. Call (877) 752-4194 for a free estimate.
Milpitas Construction is a full-scope general contractor with active access to 50+ brand-name product lines, and we’ve spent years working with CGI Elite and Shaker cabinetry in Boulder Creek’s redwood-damp conditions. We’re not manufacturer-authorized or warranty-backed by CGI. We’re independent, which means we can repair and refit what’s worth saving instead of pushing a full replacement. From CGI sales & service knowledge to quartz fabrication on sloped lots, we know this product line and this terrain.
Why Boulder Creek Residents Choose Us for CGI Service
Boulder Creek homes are different from anything on the flats. Older redwood-era cabins, mid-century builds on pier-and-post, post-CZU rebuilds with new fire-hardening requirements. The cabinetry and countertops going into these homes have to handle damp shade, racked framing, and inspections that don’t move on anyone’s schedule.
Ken Stafford, our owner, got his foundation in construction technology at Evergreen Valley College before spending more than two decades on residential builds, additions, and remodels around the Bay Area. His dad was a finish carpenter, and that’s where our thing about doing work you’re not embarrassed to stand behind comes from. We spec CGI materials by name, so you know exactly what’s going into your Boulder Creek kitchen, and we sequence the install for the inspections and the slope, not just the aesthetic.
We’re one of the few our General Contractor in Boulder Creek teams with single-contract accountability across every phase: from the roofline to the kitchen counter, one contractor, one conversation. Cabinet install, quartz fabrication, ember-resistant venting coordination, permits. We handle it without pointing fingers at three different subs.
Styles & brands we work with
Common CGI Construction Problems We Solve in Boulder Creek
- Swelling cabinet boxes and sticking doors. Redwood shade keeps Boulder Creek damp year-round, and winter atmospheric-river storms push humidity into homes that were never built for vapor control. CGI Elite plywood boxes are solid, but when moisture gets into the door frames on an unventilated cabin, they swell, delaminate, and start sticking. We repair the underlying ventilation problem first, then refit the cabinets to match.
- Cracked quartz countertops on pier-and-post foundations. A lot of Boulder Creek homes sit on old pier-and-post footings on sloped lots. Slope creep and seismic settling rack rooms out of level by an inch or more. If the substrate isn’t shimmed and the adhesive doesn’t allow movement, the CGI quartz slab cracks right at the seam. We level and shim before we set stone.
- Corroded hinges and seizing drawer glides. Under redwood canopy, moss and mold-level moisture gets into bathrooms and kitchens. CGI hardware is quality, but ambient damp breaks down grease and finish faster here than in San Jose. We swap in OEM CGI hinges and glides so the cabinetry stays consistent, and we can add moisture-mitigation so it doesn’t come back in a season.
- Defensible-space inspection failures tied to cabinet installs. In CZU rebuilds, countertops and cabinets themselves hold up fine against heat. It’s the adjacent finishes and sealing that fail defensible-space review when ember-resistant detailing wasn’t coordinated with the cabinet install. We sequence CGI installs around fire-clearance sign-off, not in front of it.
- Out-of-plumb walls and racked studs in older cabins. Older Boulder Creek cabins often have unpermitted past additions and framing that predates modern seismic code. A CGI cabinet run on a wall that’s two inches out of plumb looks wrong and fails over time. We sister and shim the framing before the first box goes up.
CGI Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Boulder Creek’s post-CZU rebuild permit backlog is the biggest variable almost no contractor from over the hill accounts for. A kitchen or bath permit here can sit in queue with county fire-clearance review while the homeowner is living in a temporary setup. CGI cabinet and countertop installs have to be sequenced around that clearance sign-off. Ordering materials and scheduling the install on a standard Bay Area timeline means you end up with pallets of cabs sitting in the garage while you wait on the inspector. We plan the CGI order, the fabrication, and the install date around the county’s clearance calendar, not the other way around. On a redwood-shaded lot off Bear Creek Road, we took on a CGI kitchen install in a mid-century home where a prior unpermitted addition had left the floor two inches out of level. We sistered and shimmed the framing, set the Shaker boxes plumb, and fabricated the quartz with a flexible adhesive so movement from the pier-and-post foundation wouldn’t crack it. Then we sealed every gap for damp-season humidity before handing it back. Build it right the first time. The Bay Area doesn’t give you a free pass on shortcuts, and neither does Boulder Creek.
CGI Models & Products We Service in Boulder Creek
We install, repair, and refit the full CGI residential line: the Elite all-wood plywood-box cabinetry, Shaker-style solid-door kitchen lines, CGI quartz countertop slabs, and bathroom vanity cabinet collections. When a door hinge, drawer glide, or finish panel fails, we match OEM CGI parts so the cabinetry stays consistent. When an original slab or trim is discontinued, we use quality aftermarket quartz fabrication and adhesives that match the spec rather than downgrading the whole run. If the box is solid, we repair and refit. Replacing a full CGI kitchen that only needs new hinges and re-leveling is money thrown at the wrong problem.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Boulder Creek
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
What drives cost in Boulder Creek is access and substrate work. Steep graded lots mean material handling is slower. Pier-and-post homes often need shimming and leveling before cabinets or quartz go in. A free estimate tells you exactly what your home needs. Call (877) 752-4194 for a written line-item quote, no change orders hiding in the fine print.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well, with CGI service in Lompico available as well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Boulder Creek
Can you install CGI cabinets in a Boulder Creek cabin that needs to pass county fire-clearance inspection first? Yes. We sequence the CGI cabinet and countertop install around Boulder Creek’s county fire-clearance sign-off, which means we order and fabricate only after the clearance calendar is confirmed. We’ve done this on multiple CZU rebuilds. Call (877) 752-4194 to talk through your permit timeline.
Why do CGI cabinet doors swell and stick in Boulder Creek homes? Redwood shade and winter storm humidity push moisture into unventilated cabins, and the plywood boxes and door frames absorb it. The fix is usually moisture control in the room first, then refitting the doors and hardware. We do both under one contract.
Will a CGI quartz countertop crack on a pier-and-post foundation on a sloped lot? It can if the substrate isn’t shimmed and the adhesive doesn’t allow for movement. Boulder Creek’s pier-and-post homes shift with slope creep and seismic settling. We level the substrate and use a flexible adhesive fabricated for that movement. Call (877) 752-4194 for an exact assessment of your foundation.
Do you handle CGI kitchen remodels for CZU fire rebuilds in Boulder Creek? We do. Post-CZU rebuilds are a specialty for us, and we’ve worked through defensible-space detailing, fire-clearance sequencing, and CGI installs on rebuilt mountain homes across Boulder Creek and Felton CGI service areas. The estimate is free.
What does a CGI cabinet install cost in Boulder Creek? Cabinet installation typically runs $4,000 to $13,000 depending on the run length, substrate work, and finish details. Boulder Creek access and leveling often add labor that flatland quotes don’t include. Call (877) 752-4194 for a line-item quote.
Service Areas Near Boulder Creek
We serve Boulder Creek along the 95006 corridor and the surrounding mountain communities. You’ll also find us working in San Juan Bautista, Prunedale, Castroville, and Marin City when projects take us over the hill. For CGI work closer to the bay, see our CGI service in San Mateo and CGI service in Brookdale pages. Full coverage details are on our Boulder Creek service area page.
Book Your CGI Service in Boulder Creek Today
If you’re planning a CGI kitchen, cabinet refit, or quartz countertop in Boulder Creek, start with a free estimate. We’ll walk the site, check the foundation and moisture conditions, and give you a written quote before any work begins. Call (877) 752-4194.
Written by Ken Stafford, Owner at Milpitas Construction, serving Boulder Creek and the Santa Cruz Mountains.