Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Los Altos Hills, CA | Milpitas Construction
We’re Milpitas Construction, and we handle CGI cabinetry, countertops, and kitchen construction for homeowners throughout Los Altos Hills. We’re an independent crew, not a manufacturer-authorized service center, and the thing that separates our CGI work here is simple: we plan every cabinet run and counter set around this town’s hillside drainage, private-road access, and WUI fire-hardening rules. Call (877) 752-4194 for a free estimate on your Los Altos Hills project.
Why Los Altos Hills Residents Choose Us for CGI Service
A lot of cabinet crews can install a box. Fewer can tell you why a CGI thermofoil door will blister on a cold, uninsulated mid-century rancher wall in Los Altos Hills, or why a quartz counter cracks at the sink cutout when a hillside slab settles unevenly. Ken Stafford, our owner, got his start in construction technology at Evergreen Valley College and has spent two-plus decades working in and around this corner of the Bay Area. He’s seen what seismic creep and seasonal humidity swings do to kitchen assemblies, and he’ll say it plainly: build it right the first time, because the Bay Area doesn’t give you a free pass on shortcuts. We use CGI OEM hinges, drawer slides, and touch-up finishes where the cabinet box is still sound, and we’re honest when a racked box or water-swollen frame means replacement beats a reface.
Styles & brands we work with
Common CGI Construction Problems We Solve in Los Altos Hills
The climate and housing stock in Los Altos Hills deliver a specific set of CGI repair in Los Altos failure modes we see regularly. Here’s what we see most:
- Thermofoil and laminate door skins peeling at the bottom edge. Mid-century ranchers on the 94022 hills usually have uninsulated exterior walls, and a kitchen cabinet run sitting against that cold surface takes in seasonal humidity. The skin blisters, then peels. We reframe, level, and swap to CGI solid-wood door fronts when that makes sense.
- Frameless CGI boxes and drawer glides racking out of alignment. Hillside foundations shift a little every few years. A flush-closing door starts rubbing at the top corner. The box is still good, but the wall and floor aren’t plumb anymore. We re-level the run and realign hardware before the cabinet joins the scrap pile.
- Quartz CGI countertops cracking at sink and cooktop cutouts. This is common on sloped Los Altos Hills sites where floors were never re-leveled after a previous remodel. A slab set on an out-of-level run without a flexible adhesive will crack at the weakest point. We reinforce cutouts and set with flexible adhesive every time.
- Hinges and drawer slides stiffening near the wooded WUI edge. Dry summer heat and wildfire-adjacent air draw moisture out of wood door fronts and frames, and metal hardware binds. We replace worn CGI drawer slides and adjust hinge plates before they fatigue and snap.
- Reach and access problems on private roads. Many Los Altos Hills homes sit behind unimproved, narrow private roads with no shoulder. We plan our equipment scheduling around flaggers and tighter turnarounds, because getting a full truck up a hairpin in the 94022 hills isn’t the same as pulling into a Palo Alto driveway. More on that below.
CGI Service in Los Altos Hills: What Local Conditions Mean for Your Equipment
Los Altos Hills has a 1-acre minimum lot size, and the town scrutinizes grading and drainage plans for downslope impacts on neighbors’ wells and septic systems. So when your CGI kitchen or bath remodel shifts a sink or moves a plumbing fixture, the project can get pulled into a drainage review that Palo Alto and Los Altos crews simply never encounter. That means a Mountain View CGI service crew’s countertop replacement on a hillside off Altamont Road might need a grading check before we can touch the cabinet run. We handle this as part of the estimate, so you aren’t blindsided mid-project. It also means we set CGI quartz countertops over flexible adhesive with properly reinforced cutouts, because out-of-level floors and draining subgrades are the norm up here, not the exception.
CGI Models & Products We Service in Los Altos Hills
We work on the full CGI cabinet range: Euro-style frameless cabinetry with full-overlay doors and soft-close drawer systems, raised-panel and shaker-style solid-wood door fronts, and CGI quartz and quartz-composite countertop surfaces. We also service the CGI laminate and thermofoil lines common in older Los Altos Hills rancher kitchens. Our parts approach is simple: OEM hinges, slides, and touch-up finishes where the box is still sound, and an honest replacement conversation when the box is water-swollen or racked past a reface. We’re independent, not manufacturer-affiliated, which means our recommendation isn’t tied to a warranty program or a sales quota. For the full scope of what we do with this brand, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Los Altos Hills
Here’s what CGI-related work typically runs in the 94022 market. These are planning numbers; your exact price depends on cabinet layout, countertop material, and site access:
| Scope | Range |
|---|---|
| Kitchen Remodel (CGI cabinets, counters, layout) | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation (quartz) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
On a steep wooded lot off a private unimproved road above the 94022 hills, we gutted a mid-century rancher’s kitchen and found the CGI thermofoil doors peeling at the bottom edge where the cabinet run sat against an uninsulated exterior wall. We reframed and leveled the base run, swapped in CGI shaker-style solid-door cabinets with soft-close OEM slides, and set the quartz counter over a flexible adhesive with reinforced sink cutouts, then cleared defensible space around the new build before we called for inspection. That job priced at the low end of the remodel range once we re-used the existing layout. Call (877) 752-4194 for a written line-item quote; estimates are free.
Serving Los Altos Hills, CA — Our Local Coverage Area
We’re based in the Los Altos Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Los Altos Hills
Yes. On the 1-acre minimum lots in Los Altos Hills, any fixture move that changes waste or supply plumbing can pull your project into a downslope drainage and septic review. We flag this during the estimate and handle the permit path so your CGI cabinet and counter work doesn’t stall. Call (877) 752-4194 and we’ll tell you what applies to your lot.
They’ll fail at the bottom edge faster than solid-wood doors will, especially on an uninsulated wall that collects seasonal moisture. If the cabinet box is sound, we recommend swapping the door fronts to CGI shaker or raised-panel solid wood and keeping the existing boxes. If the boxes are already water-swollen, replacement usually costs less than repeated refacing.
Often yes. Sloped lots in Los Altos Hills settle on a schedule, and an out-of-level cabinet run transfers that movement straight to the weakest part of the slab: the sink and cooktop cutouts. We reinspect the run, re-level what’s needed, and set the new CGI quartz over flexible adhesive with reinforced cutouts. That fix runs from $2,000 to $6,500 depending on slab layout. Call (877) 752-4194 for an exact quote.
Yes. We run smaller equipment and schedule flaggers where the road can’t handle two-way traffic. Los Altos Hills has a lot of these pinch points above the 94022 corridor, and we plan around them before delivery day so you don’t get a material drop stuck at the corner.
A cabinet reface alone usually won’t trigger WUI review, but if you’re also replacing windows, siding, or exterior doors on the same Los Altos Hills project, the town will want ignition-resistant materials and defensible-space clearing documented. We can sequence the CGI repair in Loyola-style interior CGI work so it clears while the exterior review is underway.
Service Areas Near Los Altos Hills
We run CGI cabinet and countertop crews along the Peninsula and South Bay hills, including Marin City, San Juan Bautista, Castroville, and Prunedale. For neighboring hillside towns, see CGI service in Monte Sereno and CGI service in Stanford. Our full coverage is listed on the Los Altos Hills service area page.
Book Your CGI Service in Los Altos Hills Today
If your CGI cabinets have started peeling, rubbing, or cracking somewhere up in the Los Altos Hills, call us. We’ll get a crew out, look at the run, and give you a straight answer on repair versus replacement with OEM parts. Call (877) 752-4194 to schedule your free estimate.
Written by Ken Stafford, Owner at Milpitas Construction, serving Los Altos Hills since 2003.