Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Martin, CA | Milpitas Construction
We provide independent CGI construction service across San Martin, CA. The one thing that makes our CGI work here different is this: we route it through unincorporated Santa Clara County. No city hall counter. No quick permit pull in Morgan Hill or Gilroy. Everything structural you want done to a San Martin home sits on county land, and that changes how a contractor should plan your cabinetry, your counters, and your entire kitchen or bath remodel from day one. Call (877) 752-4194 to talk through your project.
Why San Martin Residents Choose Us for CGI Service
We’ve installed CGI kitchen and bath cabinetry across South Santa Clara County for years. We know the CGI lines that hold up to San Martin’s hot, dry summers and we know which finishes will start cracking on a south-facing wall by August. We also know the rural side of this work. Ken Stafford, Owner at Milpitas Construction, grew up near the Milpitas BART corridor back when it was mostly warehouses and family shops. We’re a full-scope general contractor, so when your CGI cabinet install reveals a framing issue or a plumbing reroute, the same crew handles it. We spec materials by name, so you know exactly what’s going into your home. We install. We repair. We replace. And we never tell you a county permit is a city permit just to make the timeline sound easier.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Martin
- Warped doors and cracked finishes from summer heat. San Martin is inland. It runs hotter than Campbell or Santa Cruz, and south- and west-facing cabinet runs take direct afternoon sun for months. We see CGI door panels warp and painted finishes crack on those exposures. Repair starts with matching the finish and adjusting or replacing the affected doors.
- Hinge and drawer glide failures in rural outbuildings. Barns, shops, and ranch outbuildings swing 30 degrees between morning and afternoon. Temperature swings accelerate wear on CGI hinges and soft-close glides. We replace worn hardware with OEM when warranty matters, and with quality aftermarket hardware when it doesn’t.
- Moisture damage to toe kicks and lower panels on well water. Many San Martin homes run on well water with high mineral content. A slow leak under the sink or a dishwasher drip sits on composite toe kicks. We replace the damaged kicks and address what caused the water contact, not just the visible damage.
- Fading and chalking on stained or painted finishes. Big windows in sunroom additions and great rooms let in heavy UV. CGI doors and panels near those windows fade, chalk, or turn chalky white over time. Refinishing works when the box is sound. Replacement is the call when the substrate under the finish has broken down.
- Cabinet boxes compromised by well-water leaks. When water damage gets into the cabinet box itself, the structural plywood can swell and lose its square. At that point repair is a stopgap, not a fix. Replacement is the honest recommendation.
CGI Service in San Martin: What Local Conditions Mean for Your Equipment
Because San Martin is unincorporated, everything flows through Santa Clara County building department channels, not a city counter. A kitchen remodel that adds or moves plumbing fixtures may require a Santa Clara County well and septic clearance before cabinets can even be ordered. That clearance confirms your existing well and septic can handle the additional demand. In Morgan Hill or Gilroy, a similar job goes through city utilities and skips that step. In San Martin, we’ve seen that county review add two to four weeks to a project timeline, and no amount of rush-ordering cabinets shortens it. So we build the well and septic review into the front end of your schedule, not as a surprise. Out on the rural edges near Llagas Road and the former orchard parcels, we also have to think about fire-defensible construction and defensible space, which can affect where an ADU or an addition can sit and how we detail exterior wall assemblies. It’s county work, and it rewards a contractor who has done it before.
CGI Models & Products We Service in San Martin
We service the CGI lines San Martin homeowners actually have in their kitchens and baths. The CGI Euro-style frameless cabinetry line, the CGI Shaker-style cabinet line, and CGI all-plywood construction cabinets all show up in ranch homes on multi-acre parcels and in newer custom homes on former orchard land. We stock common CGI hinges, glides, and touch-up materials locally for fast turnaround on San Martin jobs, and we source OEM CGI hardware when the warranty is still in play. For out-of-warranty work, we use aftermarket hardware that meets or exceeds the original spec. Three sub-services carry most of our CGI work: full kitchen remodeling, cabinet installation and refacing, and quartz and granite countertop installation. From the roofline to the kitchen counter, one contractor, one conversation.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Martin
CGI service pricing in San Martin depends on scope, condition of the existing boxes, and how much site work the county needs before we start. Here’s what installations typically run:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the cost in San Martin specifically is the pre-construction piece: well and septic clearance if fixtures move, county land-use review for additions or ADUs, and site evaluation on older well-and-septic parcels. Your free estimate includes a written line-item quote, so you see where every dollar goes. Call (877) 752-4194 and we’ll walk it with you.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Martin
Yes, in most cases you need a Santa Clara County building permit for a kitchen remodel in San Martin, especially if the project moves or adds plumbing or electrical. The county also requires a well and septic clearance before cabinets are ordered when fixtures relocate. That clearance sits outside the cabinet order itself, so it can add two to four weeks to your timeline. Call (877) 752-4194 and we’ll map your permit path before any material gets ordered.
CGI all-plywood construction cabinets handle San Martin’s heat better than composite-core boxes, but finish cracking and door warping still happen on south- and west-facing runs. The dry inland air pulls moisture out of wood faster than coastal air does. We recommend all-plywood construction for any San Martin home and we steer finishes away from dark, high-sheen paints when the run gets direct afternoon sun. Call (877) 752-4194 and we’ll spec it with you.
Yes, we install CGI cabinets in barns, shops, and ag outbuildings in San Martin. These structures swing hard in temperature, so hardware wears faster and doors move more than they would in a climate-controlled kitchen. We use the same brands in outbuildings as we do in homes, but we pay more attention to hinge and glide spec and we don’t put composite kicks where water sits. Call (877) 752-4194 for a free site look.
CGI cabinet installation in San Martin typically runs between $4,000 and $13,000, depending on the number of boxes and whether you’re refacing existing cabinets or doing a full remodel. A full kitchen remodel lands between $14,000 and $45,000. Countertop installation runs $2,000 to $6,500. Call (877) 752-4194 for an exact quote; estimates are free.
It affects your timeline and your lower-cabinet material choices. San Martin homes on well and septic often run high-mineral water, and slow under-sink leaks onto CGI toe kicks are common. We recommend under-sink filtration and we swap composite toe kicks for materials that resist mineral buildup. The well and septic clearance can also decide when your cabinets can be ordered. Call (877) 752-4194 and we’ll schedule the site evaluation first.
Service Areas Near San Martin
We serve San Martin and the surrounding south county communities. If you’re nearby in San Juan Bautista, Prunedale, Castroville, Marin City, or Silver Lakes, we can help with CGI cabinetry and full kitchen remodeling. We also cover Piñon Hills and the unincorporated pockets around the southern Santa Clara Valley.
Book Your CGI Service in San Martin Today
We’re ready to look at your San Martin kitchen, bath, or outbuilding and give you a straight answer on what your CGI project needs. Call (877) 752-4194 for your free estimate. Premium brands. Proper installation. One accountable team.
Written by Ken Stafford, Owner at Milpitas Construction, serving San Martin and the South Santa Clara County area.