Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Pomona, CA | Milpitas Construction
We provide independent CWS cabinet installation, refacing, and full kitchen remodeling across Pomona, from downtown’s pre-war bungalows to the postwar tracts in 91766. The thing that separates our CWS work here is simple: we know what hides behind Pomona’s older walls, and we plan for it before the first cabinet box comes off the truck. Call (877) 752-4194 for a free estimate on CWS cabinetry, countertops, or a complete kitchen overhaul.
Why Pomona Residents Choose Us for CWS Service
We’ve installed and refaced CWS Concord, Brookhaven, and Hartford lines in enough Pomona kitchens — plus CWS service in Claremont — to know exactly how their door styles, finishes, and drawer glides behave once they’re mounted in a 1920s Spanish Revival or a 1950s tract house with walls that haven’t been straight in sixty years. We’re a full-scope general contractor, not a cabinet-only crew, which means the same team squaring your walls and correcting your subfloor also scribes your CWS boxes to fit the actual room you have, not the room the showroom drawing assumes. Ken Stafford, our owner, grew up around Milpitas when that corridor was still warehouse lots and family shops, and he brings the same insistence on doing the job right to every Pomona project we take on. We quote our own labor, we stand behind it, and we don’t hide behind a manufacturer’s warranty when the install is the problem.
Styles & brands we work with
Common CWS Construction Problems We Solve in Pomona
- Sagging or delaminating particleboard shelves and box sides. A CWS base cabinet on a west-facing Pomona kitchen wall bakes through summer afternoons, and without ventilation that heat breaks down particleboard edges faster than anything else we see. We reinforce or replace the affected components and address the airflow issue so the problem doesn’t come back next August.
- Warped shaker doors and fatigued hinges. The Santa Ana cycle swings Pomona’s indoor humidity from bone-dry to sticky in twenty-four hours. CWS Hartford shaker doors take that cycling hard, and hinges loosen as the wood moves. We re-align doors, replace worn hardware with CWS-matched hinges, and set reveals so the next wind event doesn’t leave your doors rubbing again.
- Water-swollen toe kicks and bottom rails under sinks. A lot of Pomona’s 1940s and 1950s plumbing still weeps at the compression fittings, and the first casualty is the melamine edge on the sink base. We replace swollen rails, seal exposed edges properly, and flag the plumbing leak so your new CWS cabinets don’t inherit the same fate.
- Racked boxes and doors that won’t close. When CWS cabinets go in against bowed 1940s plaster walls without proper shimming and scribing, the boxes twist. Drawers self-open, doors rub at the corners, and the whole run looks wrong. We pull the affected cabinets, square them, scribe the fillers to the actual wall profile, and re-hang everything so it operates like the factory intended.
- Unpermitted additions that complicate the layout. We’ve opened more than one Pomona kitchen to find the “breakfast nook” was a garage conversion done in 1962 with no record on file. That changes your cabinet run, your lighting plan, and your permit path. We handle the as-built drawings and the plan check before cabinets go on the wall, which most cabinet installers won’t touch.
CWS Service in Pomona: What Local Conditions Mean for Your Cabinetry
Here’s the Pomona reality that never shows up in a catalog: pre-1950s houses around downtown frequently conceal unpermitted room additions and garage conversions, and when you’re remodeling a kitchen in one of those homes, installing new CWS cabinetry means pulling as-built drawings and clearing plan check before a single box goes on the wall. We learned this the hard way on a 1940s Spanish Revival bungalow off the downtown grid, where our crew tore out a tired kitchen and found knob-and-tube wiring feeding an unpermitted bump-out plus a bowed plaster wall that had been hiding behind the old cabinets for decades. We squared and furred the wall, ran new circuits, and set CWS Concord shaker cabinets scribed to the out-of-plumb corner, then topped them with quartz counters. The doors now close flush instead of rubbing the way the old boxes did. That’s the difference between a Pomona contractor who knows the stock and one who doesn’t: we plan for what the house actually is, not what the county records say it should be.
CWS Models & Products We Service in Pomona
We install, reface, and repair the full CWS lineup that shows up in Pomona kitchens, including Los Serranos CWS service: Concord and Concord Plus semi-custom all-plywood cabinetry, Brookhaven framed and frameless lines, the Designer and Classic series bath vanities, and Hartford shaker and raised-panel door styles. When a hinge, glide, shelf clip, or touch-up finish is needed, we match CWS-specific hardware and drilling patterns rather than grabbing generic parts that don’t align. If a box or door is structurally sound, we reface and re-hinge it. If the carcass is swollen or delaminated from water or heat, replacement is the honest call. We’ll tell you which one you’re looking at before you spend a dollar.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Pomona
Pomona’s CWS cabinetry work prices out like this: cabinet installation and refacing runs $4,000 to $13,000 depending on run length and door count; a small kitchen remodel sits between $9,000 and $20,000; and a full kitchen with new CWS boxes, counters, and layout changes lands at $14,000 to $45,000. Countertops add $2,000 to $6,500 for quartz or granite, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. What drives the number is scope, wall condition, and whether plan check enters the picture. Your free estimate covers all of it, with line items you can read. Call (877) 752-4194 to schedule one.
| CWS Service | Typical Range in Pomona |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well, and we also provide CWS in La Verne. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Pomona
Yes, and that’s exactly the kind of kitchen we work in most often. The process is to square and fur the wall where it’s out of plumb, then scribe the CWS fillers and end panels to the actual wall profile so the cabinet run sits flat and the doors close flush. It takes longer than throwing boxes at a flat drywall wall, but it’s the only way CWS cabinets hold their alignment in an old Pomona house.
Almost always the install. CWS cabinets are built square at the factory; when doors rub and drawers drift open, the problem is usually racked boxes mounted to an out-of-plumb wall, or hinges that shifted because the wall moved behind them. We level and square the run, adjust or replace the hardware, and the problem goes away. Call (877) 752-4194 for an inspection.
For a straight cabinet replacement with no layout, plumbing, or electrical changes, usually not. But in Pomona’s pre-1950s housing stock, we regularly find unpermitted additions and garage conversions that trigger plan check once the scope expands. If your remodel touches walls, electrical, or plumbing, expect permits and possibly as-built drawings. We handle that paperwork as part of the project.
Over time, heat and humidity cycling will stress particleboard components, warp shaker doors, and loosen hinges. The fixes are ventilation improvements where possible, proper sealing of exposed edges, quality installation that leaves correct reveals, and choosing plywood boxes in the Concord line if your kitchen gets direct western sun. We spec materials for the conditions Pomona — and nearby areas where we offer CWS repair in Montclair — actually throws at them.
Yes, if the boxes and frames are structurally sound. We replace doors, drawer fronts, hinges, and glides with CWS-matched components, and we apply new veneer or paint to match. If the carcass has swollen or delaminated from water damage, refacing is throwing good money after bad, and we’ll say so. Call (877) 752-4194 for a straight answer either way.
Service Areas Near Pomona
Our CWS cabinetry and kitchen remodeling work reaches Pomona plus the surrounding foothill and valley communities. We regularly take projects in San Juan Bautista, Castroville, Prunedale, Silver Lakes, Piñon Hills, and Marin City. If you’re nearby and planning a CWS kitchen, CWS service in Buena Park and CWS service in Hesperia show how we handle the same work in neighboring markets. For the full picture of where we work, see our Pomona service area page.
Book Your CWS Service in Pomona Today
If your Pomona kitchen needs new CWS cabinets, a reface, or a full remodel, call (877) 752-4194 to schedule a free estimate. Ken will walk the room with you, tell you what the walls are actually doing, and give you a written scope with real numbers. On the CWS side of things, our CWS sales & service page breaks down the full range of what we handle.
Written by Ken Stafford, Owner at Milpitas Construction, serving Pomona with CWS cabinetry and kitchen remodeling.