Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Belmont, CA | Milpitas Construction
We provide independent ES Windows service across Belmont, from Ralston Avenue up the hillside to the canyons above Belmont Creek, and also offer San Carlos ES Windows service nearby. We install, repair, and replace ES Windows vinyl and aluminum lines, and we do it as a full-scope general contractor, not a manufacturer-affiliated shop. The difference here: we know Belmont’s hillside grading, drainage, and geologic review process cold, so your ES Windows work gets done right the first time. Call (877) 752-4194 for a free estimate.
Why Belmont Residents Choose Us for ES Windows Service
We’re not an ES Windows dealer. We’re a Peninsula construction crew that’s been pulling permits, framing openings, and setting windows in Belmont long enough to know the brand’s quirks. Ken Stafford, our owner, got his start in construction technology at Evergreen Valley College and has spent two-plus decades building and remodeling across the Bay Area. He grew up near the Milpitas BART station when that corridor was still warehouse lots, and he still runs jobs with the same rule his dad, a finish carpenter, taught him: do work you’re not embarrassed to stand behind.
What that means for your Belmont home is simple. We read ES Windows spec sheets, stock OEM sash and hardware for the lines that are still supported, and keep quality aftermarket rollers, weatherstrip, and glazing on hand for older profiles. You get straight answers about whether a unit needs glass, hardware, or a full frame reset, and you get one crew that handles the window, the flashing, and any framing that goes with it. No finger-pointing between a window vendor and a separate contractor.
Styles & brands we work with







Common ES Windows Construction Problems We Solve in Belmont
- Racked vinyl frames on hillside lots. Belmont’s slopes settle. Rough openings shift. ES Windows vinyl single-hungs and double-hungs bind, sashes stop closing, and corner welds crack. We square the opening, refasten the frame, and reset the unit so it actually operates.
- Fogged glass on sun-exposed upper slopes. Homes above Waterdog Lake take direct west sun. Insulated glass seals fail faster up there than in the shaded canyons. We replace failed IG units with OEM or matched glazing and check the frame before anything else.
- Water intrusion above Belmont Creek. Hillside stormwater shear and wind-driven winter rain push past poorly flashed sill pans and weep holes. We pull the old flashing, install proper pans, and make sure drainage weeps actually drain.
- Sliding patio door hardware failure. Grit, slope-load shifting, and years of use wear out ES Windows rollers and lock hardware. Panels won’t latch flush. We replace rollers, adjust tracks, and realign doors so they close and lock without a fight.
- Frames out of square from original 1950s construction. Belmont’s mid-century ranchers were built before modern seismic and drainage standards. Original openings are rarely square. We check every rough opening before ordering or setting a new ES Windows unit.
ES Windows Service in Belmont: What Local Conditions Mean for Your Equipment
Here’s the thing most window contractors from flatland Redwood City or our San Mateo ES Windows service area don’t plan for: much of Belmont sits on sloping hillside lots and in canyons like Belmont Canyon and the Waterdog Lake area. A window replacement here isn’t a pull-and-set job. Slope stability, stormwater runoff, and the city’s hillside and geologic review all come into play before framing starts. If your home is on a hillside, the city may require a hillside review or drainage check as part of the permit, and that changes the scope of the work.
What does that mean for ES Windows specifically? On a recent mid-century rancher up in the Waterdog Lake area, our crew found ES Windows sliding patio doors that no longer latched and two fogged fixed units. The hillside had shifted the rough opening, and the west sun had cooked the seals. We pulled the door, squared and refastened the frame, set new OEM rollers, and swapped the failed glazing units. The door latches flush, the glass stays clear, and the homeowner didn’t have to replace a perfectly good frame. That’s the kind of fix you only get when you understand both the brand and the ground it’s sitting on, as we do with ES Windows in Redwood Shores and throughout the Peninsula.
ES Windows Models & Products We Service in Belmont
We work on ES Windows vinyl single-hung and double-hung replacement windows, vinyl casement and awning units, aluminum series windows common on custom hillside homes, and ES Windows sliding glass doors. For supported profiles, we use ES Windows OEM sash, glass, and hardware. For older or discontinued lines, we install quality aftermarket rollers, weatherstrip, and glazing that match the original spec. If a unit is truly beyond saving, we’ll tell you straight and quote a replacement. We also handle full window replacement, impact window installation, roof replacement, and roof repair, so your exterior envelope stays under one contract. For more on our full ES Windows capabilities, see our ES Windows sales & service page.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Belmont
Window work in Belmont comes down to scope: a single fogged glass unit costs far less than a full-house replacement with impact glass. Here’s where our ES Windows work typically lands:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
Your free estimate includes an on-site look at the existing units, an assessment of the openings and any hillside review requirements, and a written line-item quote. Fixed pricing, no change orders. Call (877) 752-4194 to schedule yours.
Serving Belmont, CA — Our Local Coverage Area
We’re based in the Belmont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Belmont
Slope creep and settling shift rough openings out of square, which racks the vinyl frame and binds the sash. We square the opening, refasten the frame, and reset the unit before anything else. Call (877) 752-4194 and we’ll take a look.
Yes. We replace failed insulated glass units with OEM or matched glazing, depending on the profile. We’ll inspect the frame first, because on Belmont hillside homes a bad frame can cause the seal to fail again.
They do. Hillside stormwater shear and wind-driven winter rain demand properly flashed sill pans and clear weep holes. We pull old flashing and install pans that actually shed water, not trap it.
Often yes. Belmont’s hillside and geologic review can trigger for slope-side work, especially on canyons and lots above Belmont Creek. We handle that review process as part of the permit, so you don’t get surprised mid-project. Call (877) 752-4194 for a free estimate and we’ll map it out.
It can be, yes. We handle roofing, windows, and the framing and flashing in between, so one crew fixes the leak and the failed units under one contract.
Service Areas Near Belmont
We serve Belmont and the surrounding Peninsula. Our ES Windows service in Foster City covers flatland and bayfront homes, while our ES Windows service in Lompico handles the steep Santa Cruz Mountain lots. For the broader area, see our Belmont service area page.
Book Your ES Windows Service in Belmont Today
If your ES Windows are fogged, binding, leaking, or just showing their age on a Belmont hillside, call (877) 752-4194. We’ll send a crew that knows the brand, the hills, and the permit path. Free estimates, fixed pricing, and work we’re proud to sign.
Written by Ken Stafford, Owner at Milpitas Construction, serving Belmont and the Peninsula since he picked up his first framing hammer.