Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Felton, CA | Milpitas Construction
We provide independent KraftMaid installation, refacing, and full kitchen remodeling across Felton, CA, and we’re one of the few general contractors in the San Lorenzo Valley who can tie KraftMaid’s real failure points to what actually happens in redwood-shade damp and on sloped lots. We’re not authorized by KraftMaid or affiliated with the manufacturer. That independence means our advice gets straight to what holds up in your kitchen, not what a dealer program tells us to say. Call (877) 752-4194 for a free estimate, or read on to see how KraftMaid work plays out here in Felton and in nearby communities like KraftMaid service in Ben Lomond.
Why Felton Residents Choose Us for KraftMaid Service
KraftMaid builds a solid cabinet across their Vantage, Momentum, and Passage lines, but every cabinet line has pressure points. In Felton, those pressure points show up faster than in flat-lot subdivisions: fog-damp air, long wet winters, wildfire-season heat cycles, and the slow settling that comes with tree-rooted, sloped lots. We’ve pulled enough KraftMaid boxes out of mountain kitchens to know exactly where the moisture gets in and when a repair beats a replacement. Ken Stafford, our owner at Milpitas Construction, has spent over two decades building and remodeling around the Bay Area’s soil shifts, and he’ll tell you the same thing we tell every Felton homeowner: a cabinet is only as good as the wall behind it and the box it’s built on. We spec genuine KraftMaid replacement doors, drawer fronts, and hinges where the line is still supported, and we’re straight about when aftermarket soft-close glides do the job better than a back-ordered OEM part.
We’re a full-scope general contractor, which matters more in Felton than most people expect. The same crew managing your KraftMaid kitchen can also handle the vapor barrier, the siding flash, the drywall repair, and the leveling work that a dedicated cabinet installer wouldn’t touch. One contractor, one conversation. And since we’re part of KraftMaid sales & service across the Bay Area, we’ve seen this exact cabinet line behave in every microclimate from the coast to the ridgelines.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Felton
These are the failures we actually see in Felton kitchens, not a generic list from a manufacturer manual:
- Door and drawer-face swelling at the bottom edges. Felton’s fog and winter rain drive moisture into MDF and particleboard core panels, especially where cabinets sit tight against cold exterior walls in the redwood shade. A door that swells here isn’t a defect; it’s a detailing problem on the wall behind it.
- Face-frame stile separation and hinge screw pull-out. Older Felton cottages settle on slopes and tree roots, and as the floor racks out of square, the cabinet box follows. Hinges start pulling, stiles separate, and doors hang crooked. We reset boxes, square the frame, and refit the hinges.
- Finish checking and peeling on painted KraftMaid doors. Sun-facing kitchens in Felton cycle hard: damp winter months followed by dry, hot wildfire-season weeks. Paint blisters and checks at the same edges where moisture got in. We touch up with matched KraftMaid finishes when the damage is surface-level, and reface when it’s gone deeper.
- Drawer-glide corrosion and box cupping in damp shade. Kitchens that sit against cold exterior walls without a proper vapor break collect condensation. Slides corrode, plywood boxes cup, and drawers start sticking. We replace the glides, re-detail the wall, and often add a plywood end panel to keep it from coming back.
- Out-of-square boxes on additions and detached structures. Felton slopes mean lots of kitchens live in additions or walkout lower levels, where the foundation moves a little each wet season. KraftMaid boxes installed on a settling slab rack out, and doors that were fine in September are binding by March. We fix the box and address the movement, not just the hinge.
KraftMaid Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the thing most generic cabinet pages never mention: on many Felton lots, the buildable envelope is pinched by redwood canopy and slope. Kitchen cabinet runs often butt tight against exterior walls, addition walls, or detached-structure walls where the framing never fully dries. In a flat-lot subdivision, you can set a KraftMaid cabinet run against an interior wall and forget about it for twenty years. In Felton, that same run against a cold exterior wall without a vapor break will start cupping and swelling within a few wet seasons. We saw it on a remodel off Hihn Street: a run of KraftMaid Vantage cabinets whose particleboard boxes had swollen against a cold wall in the redwood shade. We cut out the water-damaged boxes, added a vapor break, re-flashed the wall, then reset the surviving KraftMaid doors and extra drawers on new soft-close glides with an added plywood end panel. Kitchen closed out before the rains hit. That’s Felton-specific work, and it’s why we do the wall detailing before we ever hang a cabinet.
KraftMaid service in Lompico and Felton means understanding that redwood-belt damp never stops working on wood products. Your kitchen isn’t failing because KraftMaid builds a bad cabinet. It’s failing because the mountain environment finds every shortcut in the installation. We don’t take shortcuts. Build it right the first time – the Bay Area doesn’t give you a free pass on shortcuts.
KraftMaid Models & Products We Service in Felton
We install and service the KraftMaid Vantage series (entry-level semi-custom door and drawer fronts), the Momentum line (fully assembled, frameless full-overlay), and the Passage standard-overlay face-frame cabinetry. That covers both plywood-box and particleboard-box construction, plus painted and wood door finishes. When a door or drawer front needs replacement, we source genuine KraftMaid parts while the line is supported. When OEM parts are discontinued or back-ordered, we spec quality aftermarket soft-close glides and hinges rather than leave you waiting through a wet season. Our honest stance on repair versus replace: reface and re-box when the cabinet boxes are square and sound, and replace when water damage or slope-driven settling has compromised the box or the face frame. For Felton homeowners inside the Felton service area, that usually means we can keep a lot of original KraftMaid doors and just rebuild what failed behind them.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Felton
What you’ll pay for KraftMaid work in Felton depends on how much of the original cabinet survives and what the wall behind it needs. Here are the ranges we work with:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost in Felton specifically: whether we’re dealing with a slope-settled floor that needs leveling before cabinets go in, whether the exterior wall needs a vapor break and re-flash, and whether your existing KraftMaid boxes are worth saving or need full replacement. A free estimate from us includes a straight answer on all of that, written out line by line. Call (877) 752-4194 and we’ll come take a look.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, and we also provide KraftMaid service in Mount Hermon. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Felton
Yes, we run KraftMaid in Scotts Valley and Felton cabinet installs and countertop fabrication as one scope under one contract. In Felton that matters because a sloped floor means the cabinet deck has to be dead level before any countertop template is cut. We handle both sides, so the counters fit the cabinets and the cabinets fit the floor. Call (877) 752-4194 for a combined quote.
No, we’re an independent KraftMaid installer and construction contractor, not a manufacturer-authorized dealer. That independence means our recommendations are based on what actually holds up in Felton homes, not on moving dealer inventory. We source genuine KraftMaid parts when they’re available and spec better aftermarket components when they’re not.
Yes, we use genuine KraftMaid replacement doors, drawer fronts, hinges, and touch-up finish while the line is supported. When OEM parts are discontinued or back-ordered, we’ll tell you up front and spec quality aftermarket soft-close glides and hinges instead of letting a kitchen sit half-finished through a Felton winter.
We cover Vantage, Momentum, and Passage lines, including plywood-box and particleboard-box construction, painted finishes, and wood doors. We also reface and re-box surviving KraftMaid cabinetry from remodels that predate current model names, which comes up constantly in Felton’s older redwood-era cottages.
Small focused repairs, like hinge screw pull-out or a single swollen door, often run a few hundred dollars. A full reface or re-box on a Felton kitchen typically runs $4,000 to $13,000 depending on how much original cabinetry survives and what the wall detailing needs. Call (877) 752-4194 for an exact line-item quote. Estimates are free.
Service Areas Near Felton
We serve Felton and the surrounding mountain towns, including San Juan Bautista, Castroville, Prunedale, and Marin City. We also provide KraftMaid service in Hillsborough and KraftMaid service in Half Moon Bay for coastal and peninsula projects. If you’re anywhere in the San Lorenzo Valley, we’ll come take a look.
Book Your KraftMaid Service in Felton Today
Whether you need a full KraftMaid kitchen remodel or a targeted repair on a single cabinet run, we’ll give you a straight answer and a written line-item quote. Call (877) 752-4194 to schedule your free estimate. We’ll come see what’s going on in your Felton kitchen before the next wet season starts.
Written by Ken Stafford, Owner at Milpitas Construction, serving Felton and the San Lorenzo Valley since founding the company.