Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Ben Lomond, CA | Milpitas Construction
We provide independent Mr-Glass service across Ben Lomond, CA, handling frameless shower enclosures, walk-in shower installation, and full shower remodeling. What makes our Mr-Glass work different here comes down to one thing: almost every Ben Lomond home sits on a hillside, and glass doesn’t forgive a wall that’s moved. We templated, shimmed, and corrected enough Mr-Glass installs on out-of-plumb canyon walls to know the hardware’s tolerances by feel. Call (877) 752-4194 for a free estimate.
Why Ben Lomond Residents Choose Us for Mr-Glass Service
Ken Stafford, our owner, built his reputation on Bay Area remodels that hold up through soil shifts and seismic quirks. He learned construction technology at Evergreen Valley College before ever swinging a hammer on a paying job, and he’s spent two-plus decades since then fixing the kind of mistakes that show up after a wet winter. That background matters in Ben Lomond, where a Mr-Glass enclosure is only as good as the wall behind it. We’re not a manufacturer-authorized dealer. We’re an independent contractor, and we’ve learned Mr-Glass hardware tolerances and leveling quirks by correcting installs that failed, not by reading a spec sheet. That’s the credibility that counts when your shower door drags after the ground settles. For a full picture of Mr-Glass sales & service, see our brand page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Ben Lomond
- Door sag and hinge binding on frameless enclosures. Ben Lomond hillside walls were rarely plumb to begin with, and they drift further after wet winters. Mr-Glass headerless hinges have tight tolerances; when the wall moves a quarter inch, the door starts dragging at the threshold. We re-templated and re-anchor.
- Silicone and sweep gasket failure after atmospheric-river storms. The canyon catches heavy winter rain, and failed sweeps let water track onto unprotected framing below. We replace Mr-Glass OEM sweeps before rot moves into the subfloor.
- Sliding-track corrosion and roller failure. Ben Lomond’s wet-winter humidity and hard canyon water chew through semi-frameless sliding enclosure hardware faster than coastal air does. We see corroded rollers on Mr-Glass sliding kits every season.
- Anchors pulling on pier-and-post floors that flex. Most Ben Lomond cabins sit on partial foundations. A glass enclosure anchored to a moving floor cracks near the hinge cutouts. We address the anchoring plane before resetting glass.
- Cracked glass at hinge cutouts from out-of-plumb mounting. When an installer forces a Mr-Glass panel square against a crooked wall, the stress concentrates at the hinge. We’ve seen the spider cracks. The fix is re-templating, not more caulk.
Mr-Glass Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Ben Lomond’s hillside cabins are overwhelmingly on pier-and-post or partial foundations, so a Mr-Glass enclosure here is only as square as a floor that may have shifted after a wet winter. Glass has to be templated to the actual floor rather than a nominal dimension. At a mid-century redwood cabin near Brookdale, our crew re-templated a Mr-Glass frameless enclosure after the original installer mounted it to a wall that had gone out of plumb following a wet season. We shimmed and re-anchored the hinges to the corrected plane, replaced the corroded OEM sweeps, and reset the glass so the door swung clean without binding. The shower has stayed tight through two storm cycles since. That’s the Ben Lomond difference: flat-lot specs don’t survive here. If you’re in Ben Lomond service area, we templated for your actual floor, not the blueprint’s wishful thinking.
Mr-Glass Models & Products We Service in Ben Lomond
We service the full span of Mr-Glass product lines: the Frameless Shower Door systems built around standard 3/8-inch glass with headerless hinges, Semi-Frameless Sliding Shower Enclosure kits, and custom-cut glass panels including Neo-Angle corner enclosures. When the original Mr-Glass spec is still in production, we source OEM hinges, rollers, and sweeps. When it isn’t, we match dimensionally identical quality aftermarket hardware. On older mountain-cabin enclosures, we lean toward replacing the whole unit rather than chasing discontinued trim, because one failed hinge often means the glass and anchors are near end of life too.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Ben Lomond
Pricing for Mr-Glass shower work in Ben Lomond depends on enclosure type, whether we’re replacing or repairing, and what the existing framing looks like once we open the wall. Here’s what you can expect:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate includes a look at the underlying floor plane and wall condition, because in Ben Lomond those dictate the glass more than any catalog measurement. Call (877) 752-4194 to schedule a free estimate.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well, with Lompico Mr-Glass service also available nearby. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Ben Lomond
It’s usually not the brand. Mr-Glass headerless hinges are machined to tight tolerances, but they depend on a plumb wall and a stable floor. In Ben Lomond, hillside walls drift and pier-and-post floors shift, so the hinge plane moves out of square and the door starts binding. We fix the mounting plane, not the hardware alone. Call (877) 752-4194 for an inspection.
Mr-Glass in Brookdale follows the same rules: shower enclosure replacement typically doesn’t require a building permit, but if we find rot in the surrounding framing or need to alter plumbing, Santa Cruz County may want a look. We’ll tell you before any work starts. For a specific answer about your cabin, call (877) 752-4194.
Yes, unfortunately. The same conditions affect Mr-Glass repair in Felton — wet-winter humidity and hard canyon water accelerate corrosion on sliding hardware. OEM sweeps and rollers last fewer seasons here than in drier parts of the county. We stock replacements and can swap them before water tracks into unprotected framing. Call (877) 752-4194 for a free estimate.
Yes, if the install works with the movement instead of fighting it. We anchor to the corrected plane, use proper shimming at the hinge points, and template glass to the actual floor rather than a nominal dimension. Forced-square installations on moving Ben Lomond floors are how glass cracks at the hinge cutouts. Call (877) 752-4194 to have yours looked at.
Check the door swing. A properly mounted Mr-Glass enclosure swings smoothly through its full range without dragging or binding. Check the sweeps too; they should seat evenly against the threshold. If the door catches or the silicone is doing structural work, the install was off. Call (877) 752-4194 and we’ll assess it.
Service Areas Near Ben Lomond
We also cover nearby mountain and coastal communities, including Scotts Valley, where we run Mr-Glass service in Scotts Valley, and Day Valley, where we provide Mr-Glass service in Day Valley. We work in Marin City, San Juan Bautista, Castroville, Prunedale, Silver Lakes, and Piñon Hills as well.
Book Your Mr-Glass Service in Ben Lomond Today
Call (877) 752-4194 to schedule your free Mr-Glass estimate in Ben Lomond or Mr-Glass in Mount Hermon. We’ll measure your actual floor and wall, not the blueprint, and give you a written line-item quote.
Written by Ken Stafford, Owner at Milpitas Construction, serving Ben Lomond and the Santa Cruz Mountains.