Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Bloomington, CA | Milpitas Construction
We provide independent Mr-Glass service across Bloomington, CA, handling frameless shower enclosures, glass panels, and hardware for homes throughout the 92316 ZIP code. The one thing that makes our Mr-Glass work here different is simple: Bloomington is unincorporated San Bernardino County, which means shower remodels and glass retrofits run through county plan review and inspections, not a city counter, and we sequence every enclosure around that process. Call (877) 752-4194 for a free estimate.
Why Bloomington Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass frameless shower enclosures across the Inland Empire long enough to know how their 3/8″ and 1/2″ tempered panels, hinge systems, and sealing profiles actually hold up in real homes. Not in a showroom. In houses where the water is hard, the summers hit 105°F, and the alcove was framed in 1968 by someone who apparently didn’t own a level. Ken Stafford, the owner here, has spent more than two decades working Bay Area and Southern California construction, and his thing has always been doing work you’re not embarrassed to stand behind. That’s why we use Mr-Glass-spec OEM hinges, sweeps, and sealing profiles where they’re still available, and quality aftermarket hardware when OEM parts are discontinued. We’re an independent Mr-Glass service provider. Not manufacturer-authorized, not sponsored, not endorsed. Just a general contractor that knows this product line well and works on it every week across Bloomington.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Bloomington
Older Bloomington homes, especially the mid-century stucco ranches off Valley Boulevard and Cedar Avenue, throw specific problems at shower glass. Here’s what we see most often:
- Hinge and pivot hardware loosening or corroding. Inland heat cycling plus hard-water minerals work on the metal until doors begin to sag and no longer seal. We replace the worn hinges and re-hang the panel so it clears the curb properly.
- Silicone sweeps drying and pulling away. Bloomington summers routinely push past 100°F, and those sweeps shrink, harden, and let water migrate onto the curb and into the bathroom floor. We replace them with fresh sealing profiles matched to the panel thickness.
- Tempered glass chipped at the edge. This happens most often when an enclosure was retrofitted into an out-of-square alcove during the original install. A stressed or chipped edge is a latent shatter risk, not something to ignore.
- Hard-water spotting and mineral etching. The water in this part of San Bernardino County is rough on glass. Owners sometimes think the panel is defective when it’s actually a maintenance issue. We can tell the difference and advise accordingly.
- Out-of-square enclosures that never sealed right from day one. It’s a Bloomington specialty, frankly. Older homes, county-permitted add-ons, framing that shifted over decades. We shim, re-set, or rebuild the opening before the glass goes back in.
Mr-Glass Service in Bloomington: What Local Conditions Mean for Your Equipment
Here’s the part nobody tells you about owning a Mr-Glass enclosure in Bloomington specifically. Because this is unincorporated San Bernardino County, any bathroom or shower remodel that moves plumbing or walls runs through San Bernardino County Land Use Services plan review rather than a city building department. That means the inspection timeline, the setback rules, and the sequencing of glass installation all operate differently than they would in Fontana, Rialto, or Colton. We sequence the enclosure and inspection timing around county sign-off, not a municipal counter. On a mid-century ranch off Cedar Avenue, our crew converted a leaking tub alcove into a walk-in shower with a Mr-Glass frameless enclosure, and the original alcove was so far out of square that we had to shim and re-set the wall framing before the 1/2″ panel would hang and seal true. We replaced the sagging OEM pivot hinges, installed new sweeps, and the door now closes flush and clears the curb. No water tracking onto the tile. If you live in Bloomington and your glass was installed years ago, there’s a good chance it never had that level of attention.
Mr-Glass Models & Products We Service in Bloomington
We service the full Mr-Glass residential lineup you’ll find in Bloomington homes: the Frameless Shower Enclosure in 3/8″ and 1/2″ tempered panels with wall-mount or header-mount hinges, the Semi-Frameless Sliding Shower Door, the Neo-Angle Corner Shower Enclosure, and custom-cut glass panels and mirrors. Our parts approach is honest: we use Mr-Glass-spec OEM hinges, sweeps, and sealing profiles when they’re available so doors hang and seal correctly. When OEM parts are discontinued, we use quality aftermarket hardware that matches the original spec. If the glass itself is sound, we repair and re-hang. We only recommend full replacement when panels are chipped at the edge, out of square beyond adjustment, or the enclosure is being reconfigured. See our full Mr-Glass sales & service page for more detail on how we work with this product line.
Mr-Glass Service Pricing in Bloomington
Pricing for Mr-Glass shower work in Bloomington depends on scope, panel thickness, and whether we’re repairing existing glass or doing a full install. Here’s what you’re looking at:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives the cost is whether plumbing moves, whether county plan review is required, and what condition the existing framing is in. A free estimate includes a written line-item breakdown. Call (877) 752-4194 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterKey Takeaways
- We’re an independent Mr-Glass service provider serving all of Bloomington, CA, ZIP 92316.
- County permitting knowledge matters here, and we sequence glass work around San Bernardino County Land Use Services.
- We repair before we replace. OEM parts first, quality aftermarket when needed.
- Free estimates with written line-item pricing. Call (877) 752-4194.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well, and we also provide Mr-Glass service in Glen Avon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Bloomington
Yes, if you’re moving plumbing or walls. Bloomington is unincorporated San Bernardino County, so the review goes through San Bernardino County Land Use Services, not a city building department. If we’re only replacing glass and hardware in the existing footprint, a permit is typically not required. Call (877) 752-4194 and we’ll tell you what your project needs.
Almost always, the hinge or pivot hardware has loosened or corroded. Inland heat cycling and hard-water minerals accelerate that wear, especially in Bloomington homes where summer temperatures sit over 100°F. We replace the worn hardware with Mr-Glass-spec parts and re-hang the door so it closes flush and clears the curb, just as we do for Mr-Glass repair in Pedley.
Yes, and it happens all the time here. Mid-century Bloomington homes off streets like Cedar Avenue and Valley Boulevard often have alcoves that have shifted out of square over decades. We shim and re-set the framing before the glass goes in, so the panel hangs true and seals properly. Call (877) 752-4194 for a site assessment.
The glass itself, no. Tempered panels handle heat fine. What the heat does is dry out silicone sweeps and sealing profiles, causing them to shrink and pull away from the curb. It also accelerates mineral buildup on hardware. We see it constantly across Bloomington. The fix is fresh sweeps and hardware maintenance, not new glass.
If the glass has a chip at the edge, especially near hinges or hardware, replacement is the safe call. A chipped edge on tempered glass is a latent shatter risk. If the panel is sound but the hardware is worn, we repair and re-hang. If it’s out of square beyond adjustment, that’s a replacement conversation. Call (877) 752-4194 and we’ll assess it honestly.
Service Areas Near Bloomington
We serve the whole Bloomington service area and the surrounding region. That includes work in Fontana, Rialto, Colton, and Rancho Cucamonga. We also handle Mr-Glass service further out, including Mr-Glass service in Lake Arrowhead and Mr-Glass service in Norco.
Book Your Mr-Glass Service in Bloomington Today
If your Mr-Glass enclosure needs repair or you’re planning a shower remodel in Bloomington, call (877) 752-4194 to schedule a free estimate. Ken and the crew will come out, look at the alcove, and give you a straight answer.
Written by Ken Stafford, Owner at Milpitas Construction, serving Bloomington and the Inland Empire with independent Mr-Glass service.