Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Colma, CA | Milpitas Construction
Milpitas Construction provides independent Mr-Glass sales, installation, and repair across Colma’s 94015 ZIP code. We are not a manufacturer affiliate or authorized dealer – we’re a full-scope general contractor that installs and services Mr-Glass shower enclosures and glass systems in real Colma buildings, where fog-belt moisture, older framing, and cemetery-adjacent scheduling make generic installation advice useless. Call (877) 752-4194 for a free estimate on any Mr-Glass enclosure, walk-in shower, or glass panel project in Colma.
What makes our Mr-Glass work different here is simple: Colma is not a normal residential market. Most of the town’s 2.3 square miles is cemetery grounds, mausoleums, chapels, and funeral homes along El Camino Real. When we template a Mr-Glass frameless enclosure in Colma, we’re usually working in an older single-family home near the Daly City edge, a staff bathroom at a mortuary facility, or a support building on cemetery property – not a clean new subdivision bathroom. That changes how we anchor hardware, schedule pours, and route around burial services. For a deeper look at the brand itself, see our Mr-Glass sales & service page.
Why Colma Residents Choose Us for Mr-Glass Service
We’re not a glass-only shop. Milpitas Construction is a full-scope general contractor led by Ken Stafford, who grew up near the Milpitas BART station back when that corridor was mostly warehouse lots, and who built his trade on the principle his finish-carpenter dad hammered into him: do work you’re not embarrassed to stand behind. That matters in Colma, because General Contractor – Colma work on enclosure failure here is rarely just about the glass. It’s about wet framing, out-of-square older walls, and waterproofing that was never right in the first place.
When you call us for Mr-Glass repair in Broadmoor or a Mr-Glass enclosure in Colma, you get one crew that understands the glass, the tile, the curb, the pan, and the permit. We source OEM Mr-Glass seals, hinges, and sweeps when the unit is current, and we specify proper aftermarket tempered glass and hardware when an OEM part is discontinued or priced above the value of the enclosure. We’ll tell you honestly whether a repair makes sense or whether you’re better off replacing the whole unit. That’s the difference between a glazier who hangs glass and a contractor who owns the entire opening. Build it right the first time – the Bay Area doesn’t give you a free pass on shortcuts.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Colma
Here are the failure modes we see most often on Mr-Glass enclosures in Colma’s fog-belt building stock:
- Bottom sweeps and magnetic seals failing on bypass doors. Colma’s damp, foggy air keeps a fine grit suspended in moisture, and that grit chews through Mr-Glass door sweeps faster than you’d see in a drier inland city. We replace the sweep and realign the bypass track so water stops tracking onto the curb and bathroom floor.
- Hinge screws pulling loose from moisture-swollen framing. This is the signature Colma problem. Older homes near the residential pockets off the 94015 side and staff bathrooms in older mortuary buildings often have wood framing that has absorbed decades of fog moisture. The hinge screws lose their bite, the door sags, and the glass hits the wall or curb. We re-anchor with proper blocking, not just longer screws.
- Hard-water spotting and mineral etching on uncoated glass. Coastal air plus poorly ventilated older Colma bathrooms means condensation sits on glass longer. Uncoated Mr-Glass panels develop etching that can’t always be polished out. We’ll tell you when it’s salvageable and when it isn’t.
- Frameless panel brackets losing sealant bead against tile. Older Colma bathrooms often have tile that has shifted slightly over the decades. The silicone bead between the Mr-Glass bracket and the tile cracks, moisture gets behind the enclosure, and the waterproofing layer starts to fail. We fix the seal properly, not just cosmetically.
- Out-of-square walls causing improper glass-to-wall contact. Colma’s older housing stock was built before modern tolerance standards. Templating a Mr-Glass frameless panel against a wall that’s off by three-eighths of an inch requires shimming, custom cutting, or creative anchoring. A showroom install won’t cover that. We do.
Mr-Glass Service in Colma: What Local Conditions Mean for Your Equipment
Here’s the checkable fact that shapes every Mr-Glass job we do in Colma: this town’s built environment is overwhelmingly cemetery structures, not housing. Colma has 17-plus cemeteries, a cluster of columbaria and mausoleums, and only about 2,000 living residents. That means the glass and enclosure work here skews toward small, older support bathrooms inside mortuary facilities, staff restrooms in cemetery administration buildings, and the handful of older single-family homes clustered near the 94015 side. We regularly schedule Mr-Glass repair in South San Francisco and Colma enclosure work around active burial and interment calendars – concrete pours, material staging, and even tool noise have to route around funeral services in ways no neighboring city requires. If we’re installing a Mr-Glass walk-in shower in a cemetery chapel’s staff bathroom, we will know when a service is scheduled and we will work around it. That’s not a line item. That’s just how Colma works, and it’s why you want a contractor who knows the town rather than one who treats it like any other Bay Area ZIP.
For a broader look at how we serve the area, see our Colma service area page.
Mr-Glass Models & Products We Service in Colma
We install and repair the full Mr-Glass product family: frameless hinged shower enclosures in 3/8-inch and 1/2-inch tempered glass, sliding and bypass tub-shower glass door systems, neo-angle corner shower enclosures, and custom-cut mirror and glass panel fabrication. On repairs, we stock common OEM Mr-Glass sweeps, seals, hinges, and rollers for fast Colma turnaround. When an OEM part is discontinued or the price exceeds the value of the unit, we specify quality aftermarket hardware and tempered glass – always disclosed, always priced before we start. The enclosure gets specified by name, so you know exactly what’s going into your home.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Colma
Here’s what Mr-Glass enclosure work typically runs in Colma, depending on scope, glass thickness, and how much tile, waterproofing, or framing correction the job requires:
| Service | Typical Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives cost in Colma specifically is the framing. If your older bathroom has moisture-swollen studs or out-of-square walls, the hinge anchoring and panel templating take more time than a clean new-build install. A free estimate includes an on-site look at the opening, the wall condition, and the waterproofing behind it – not just a tape-measure quote over the phone. Call (877) 752-4194 and we’ll price it properly.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Colma
Yes, and this is one of the most common scenarios we handle in Colma. Older homes in the residential pockets near the Daly City edge and some of the older support buildings on cemetery grounds have walls that are off by a noticeable margin. We template on-site, build in shims or custom-fabricate the panel, and anchor the hardware so the door clears the tile without contact. A showroom-standard install won’t survive an out-of-square bathroom. Call (877) 752-4194 to schedule a measurement.
Yes, and we see the evidence every week. Colma sits in the coastal fog belt just east of Pacifica Mr-Glass service territory, with cool damp summers and persistent moisture that keeps masonry and framing wet. That moisture swells wood framing, corrodes hardware faster, and leaves hard-water etching on uncoated glass. Enclosures that would last decades in a dry inland city fail faster here, especially in poorly ventilated older bathrooms. Proper sealing, blocking, and ventilation matter as much as the glass itself.
Yes. We routinely schedule Mr-Glass enclosure work, tile, and fixture replacements at Colma cemetery and mortuary facilities around active burial and interment calendars. That includes staging materials away from service areas, keeping tool noise down during ceremonies, and being flat-out off-site when a graveside service is in progress. If you manage a facility, tell us your schedule and we’ll work within it. Call (877) 752-4194 and we’ll coordinate.
It depends on what’s failing. If the glass is sound and the frame isn’t corroded, repairing a Mr-Glass enclosure – new sweeps, hinges, seals, or re-anchored brackets – is almost always cheaper than replacement. But if the glass is chipped, the framing is corroded from years of Colma moisture, or the layout no longer fits the bathroom, replacement is the honest recommendation. We don’t sell you a replacement when a repair will do. Call (877) 752-4194 for an honest assessment – estimates are free.
Yes, and this is exactly why we’re a full-scope general contractor rather than a glass-only shop. A Mr-Glass enclosure is only as good as the waterproofing behind it. We handle the pan, the curb, the tile, the waterproofing membrane, and the glass under one contract and one point of contact. If the tile or framing behind your old enclosure has failed, we fix it properly before the new glass goes in. Premium brands. Proper installation. One accountable team.
Service Areas Near Colma
We serve Colma and the surrounding communities, including Marin City, San Juan Bautista, Castroville, Prunedale, Silver Lakes, and Piñon Hills. If you’re just over the line in Mr-Glass service in Daly City, we cover that too. And if you’re further south, see our Mr-Glass service in Freedom page for coverage details.
Book Your Mr-Glass Service in Colma Today
Need a Mr-Glass enclosure repaired or a new walk-in shower installed in Colma? Call (877) 752-4194 to schedule your free estimate. We’ll look at the opening, the framing, and the waterproofing, and give you a written line-item quote. From the roofline to the kitchen counter – one contractor, one conversation.
Written by Ken Stafford, Owner at Milpitas Construction, serving Colma and the Bay Area since he first picked up a hammer.