Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in West Menlo Park, CA | Milpitas Construction
We provide independent Mr-Glass service across West Menlo Park and nearby areas, including Mr-Glass service in Palo Alto, handling frameless shower enclosures, custom mirrors, and architectural glass for homes from Alameda de las Pulgas to Santa Cruz Avenue. Milpitas Construction is not affiliated with or authorized by Mr-Glass, but we have spent years templating, installing, and repairing their glass systems, and we know how this material behaves in the mid-century ranches and second-story remodels that define this unincorporated pocket of San Mateo County. If you need a Mr-Glass enclosure measured to an out-of-square alcove or a mirror re-silvered after decades of steam, call (877) 752-4194 for a free estimate.
Why West Menlo Park Residents Choose Us for Mr-Glass Service
Mr-Glass enclosures live or die by how they are templated at the opening, and that is where we do our best work. Ken Stafford, our owner, grew up learning finish carpentry from his dad and later trained in construction technology at Evergreen Valley College, where he picked up the blueprint reading and site management habits that still guide how we measure, cut, and set glass. That background matters in West Menlo Park, where the housing stock is largely 1940s-1970s ranch homes and post-war customs that have shifted over decades. A shower alcove that looks square on the drywall rarely is, and a factory-standard Mr-Glass panel ordered off nominal dimensions will not close cleanly. We template on site, order to the as-built dimensions, and stand behind the fit. For more on our experience with Mr-Glass systems, see our Mr-Glass sales & service page.
We also keep hardware sourcing honest. Where the original Mr-Glass profile is still in production, we use genuine hinges, rollers, and handles, because the glass is drilled and tempered to those exact fittings. When a track or seal is discontinued, we tell you that too, and we use matched-spec aftermarket rollers and custom-cut vinyl sweeps rather than pretending an off-brand part is the same thing. Homeowners in West Menlo Park ask us to explain the difference, and we do.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in West Menlo Park
- Roller and track wear on Mr-Glass bypass sliding shower doors. West Menlo Park’s long dry summers let dust and grit settle into the bottom track. The original nylon rollers flat-spot and start skipping within a few years. We replace rollers and realign the track so the door glides instead of grinding.
- Hinge and seal failure on frameless fixed-and-hinged enclosures. The clear vinyl sweeps and seals shrink in the dry season, then leak at the curb during the first November rains. We see stained tile and drywall in remodels all over West Menlo Park from this exact failure. Re-hinging and re-sealing before the rains is cheaper than repairing water damage after them.
- Out-of-square openings in mid-century ranch bathrooms. When a tub-to-shower conversion goes into an original 1950s-70s framed alcove, the walls are often half an inch or more out of plumb. A factory-standard Mr-Glass panel will not close cleanly. We template to the actual opening.
- Mirror desilvering along the bottom edge. Older West Menlo Park homes often have modest original ventilation, and steam from the shower climbs onto Mr-Glass closet and vanity mirrors. The silvering fails where the glass meets the wall, leaving a fogged, blackened band. We assess whether re-silvering or replacement matches the remaining glass better.
- Track corrosion and channel wear on Mr-Glass mirror closet doors. Bypass sliding mirror systems in ranch homes built along Alameda de las Pulgas often suffer worn bottom channels and corroded roller brackets. We repair or replace the hardware and adjust the mirror panels so they slide without catching.
Mr-Glass Service in West Menlo Park: What Local Conditions Mean for Your Equipment
West Menlo Park is one of the most constrained infill jurisdictions on the Peninsula, and that shapes every glass job we take here. This is a small unincorporated San Mateo County island sandwiched between Menlo Park and Atherton, where nearly every project means remodeling or rebuilding on a fixed lot under county permitting. Construction here is remodel-and-additions work on mature lots, not greenfield building. That means the bathrooms we work in are almost always original alcoves in ranches and post-war customs, often with foundations that have settled enough to pull door openings and curb lines out of level. For Mr-Glass owners, the practical result is that a shower enclosure ordered from a showroom catalog without site templating will fight the opening, and a glass panel that leaks at the curb every winter usually traces back to an un-templated install. Because West Menlo Park is not inside Menlo Park city limits, permits for new glass and framing route through the county building department, not the city counter a few blocks away. We sequence glass and enclosure scope against county inspection milestones, because we have learned that the hard way.
Mr-Glass Models & Products We Service in West Menlo Park
We service the Mr-Glass lines most common in Peninsula ranches and remodels: frameless sliding shower door systems in 3/8-inch tempered glass, custom frameless fixed-and-hinged enclosures in the Semi-Frameless and Frameless lines, mirrored closet doors and bypass sliding mirror systems, plus custom glass table tops and interior glass panel and partition work. Our parts approach depends on the unit. Where the original profile is current, we source genuine Mr-Glass hinges, rollers, handles, and channel. Where a track or seal has been discontinued, we use matched-spec aftermarket components and custom-cut vinyl sweeps, and we always tell a homeowner when a re-hinge and re-seal will outlast the enclosure rather than pushing a full glass replacement a worn frame does not need. That matters in West Menlo Park, where homeowners renovating a once-in-a-decade bathroom want honesty about what the existing Mr-Glass hardware can still do.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in West Menlo Park
Pricing for Mr-Glass-related glass and shower work in West Menlo Park depends on the enclosure type, whether we are repairing existing glass or fabricating new, and how far the opening is out of square. The ranges below reflect typical Peninsular market pricing for the glass and shower scope we handle.
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the number is the templating. A standard alcove in a newer home is straightforward; a 1960s ranch alcove off Alameda de las Pulgas that is half an inch out of plumb takes more time to measure and order. Our free estimate covers the measurement, the glass spec, and a written line-item quote. Call (877) 752-4194 to schedule yours.
Serving West Menlo Park, CA — Our Local Coverage Area
We’re based in the West Menlo Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in West Menlo Park
Yes, in most cases. We can re-hinge and re-seal an existing Mr-Glass enclosure, or replace only the glass panel and hardware when the rest of the shower is sound. We will tell you honestly when a full replacement makes more sense than patching worn hardware. Call (877) 752-4194 for an assessment.
Because West Menlo Park is unincorporated San Mateo County, not inside Menlo Park city limits, permits for glass and framing work route through the county building department. We handle that sequencing so your enclosure and framing pass county inspections without surprises.
Almost always, it is a shrinking vinyl sweep or worn seal. West Menlo Park’s long dry season dries out the clear vinyl, and then the first November rains find the gap. Replacing the sweep and checking the hinge tension usually stops the leak. Call (877) 752-4194 for a quote.
We template the opening on site and order the Mr-Glass enclosure to the as-built dimensions, not the nominal ones. A factory-standard panel ordered off a catalog drawing will not close cleanly in many 1940s-1970s West Menlo Park alcoves, so we measure the actual wall and build to that.
In many cases, yes. We can re-silver a Mr-Glass mirror where the silvering has failed along the bottom edge, and we can source matching edge profiles and hardware for partial enclosure repairs. The first step is seeing the existing glass in person.
Service Areas Near West Menlo Park
Beyond West Menlo Park, our team handles Mr-Glass service across nearby Peninsula and South Bay communities. We cover West Menlo Park service area in full, including every job we take in 94025. We also work in Mr-Glass service in Portola Valley and Mr-Glass service in Redwood City, where the ranch housing and glass failure patterns are similar to what we see here.
Book Your Mr-Glass Service in West Menlo Park Today
If your Mr-Glass enclosure is leaking, fogging, or closing poorly, call (877) 752-4194 for a free estimate. We also provide Mr-Glass repair in Stanford with the same measure, spec, and install process. We measure, spec, and install right the first time, and we stand behind the fit. Written by Ken Stafford, Owner at Milpitas Construction, serving West Menlo Park.