Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Cypress, CA | Milpitas Construction
We provide Unilock sales & service across Cypress, CA as an independent contractor, not a dealer or factory rep. Our crew lives on Cypress’s 1960s-70s tract-home lots, where every paver project means working around tight setbacks, aging concrete aprons, and plan-check requirements at Cypress City Hall. That’s the difference: we scope every job for correct base, edge restraint, and drainage before a single paver comes off the pallet. Call (877) 752-4194 for a free estimate on paver driveways, patios, or replacement work in Cypress.
Why Cypress Residents Choose Us for Unilock Service
Unilock pavers are only as good as the base underneath them. We’ve torn out enough failed driveways in Cypress to know that the original 1960s and 70s installs rarely meet today’s standard for aggregate compaction and edge restraint. Ken Stafford, owner of Milpitas Construction, got his start in construction technology at Evergreen Valley College in San Jose and has spent over two decades learning what holds up through soil shifts and dry-summer heat cycles. That matters here. Cypress sits on coastal-influenced inland Orange County ground that stays mostly dry but bakes under hard UV, and when Santa Ana winds hit, any weakness in your paver system shows up fast.
We’re a full-scope general contractor with access to 50+ brand-name product lines, which means your paver driveway or patio gets installed by the same team that understands how your roofline drains onto it, how your garage slab height intersects it, and how your fence line ties into it. From the roofline to the kitchen counter, one contractor, one conversation. We spec materials by name, so you know exactly what’s going into your Cypress home.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Cypress
- Base failure and rutting on driveways. Older Cypress tract-home driveways were often laid without geo-grid and with under-compacted aggregate. After a couple of Santa Ana seasons and a decade of parked SUVs, you get ruts, low spots, and pavers that crack under point load. We lift the field, re-grade, compact properly, and reset.
- Polymeric sand loss and joint washout. Cypress’s dry summers and Santa Ana wind events strip loose sand from joints, then the joints open, weeds take root, and pavers start walking side to side. We re-sand with fresh polymeric material after every repair or install.
- Edge restraint creep. Driveway aprons and patio perimeters in Cypress show pavers shifting outward where the original plastic edge was spiked into soft native soil instead of set on a compacted curb. We dig out and reset with proper aluminum or paver edging.
- Efflorescence and color fade. Lighter Unilock lines like Brussels Block and Beacon Hill Flagstone show white mineral staining and UV fade faster under Cypress’s inland sun, especially where irrigation overspray hits the surface. We clean, treat, and advise on watering adjustments.
- Chipping at cupped angles. Brussels Block and Copthorne pavers have a subtle cupped top edge, and in Cypress’s high-foot-traffic patio corners and driveway edges, those lips chip over time. We replace damaged units and match the field.
Unilock Service in Cypress: What Local Conditions Mean for Your Equipment
Cypress is essentially built out. There’s no open-ground new construction here like you’d see in newer Orange County cities. Nearly every Unilock project we take on is a re-do of an existing driveway apron or back patio squeezed between two tract-home side yards. That changes how the work goes. We’re rarely pouring a fresh sub-base on empty dirt. We’re cutting out a failed paver field, hauling material through a three-foot side gate, matching the existing garage slab height so water doesn’t pool against the roll-up door, and checking the front setback against Cypress plan-check before we touch the first paver. On a 1960s tract street near the Los Alamitos border, our crew pulled up a heaved Brussels Block driveway that had been laid over an under-compacted base. We re-graded the apron to shed water away from the garage slab, reset the field on fresh compacted aggregate with proper edge restraint, re-sanded with polymeric joint sand, and walked the homeowners through the corrected slope. That driveway now ties cleanly into the front walk without holding standing water after irrigation.
Unilock Models & Products We Service in Cypress
We install and repair the full range of Unilock lines you’ll find on Cypress driveways and patios: Brussels Block, Holland Stone, Beacon Hill Flagstone, and Copthorne. For repairs, we source genuine Unilock pavers where the line is still in production so the blend matches the existing field. When a color has been discontinued, we blend the closest current Unilock run rather than fake a match and pretend it disappears. If the base is sound, we repair and re-sand. If the base under a driveway has failed, patching pavers over bad subgrade just buys a season, and we’ll tell you straight that a full lift-and-rebase is the honest call. We keep common Unilock accessories and joint sand stocked for fast turnaround on Cypress repair work, and we can order any current line through our supplier network.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Cypress
| Service | Typical Range in Cypress |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the cost in Cypress? Lot access most of all. Tight side yards mean more hand-carrying and smaller equipment, which adds labor hours. Existing concrete demo adds haul-away fees. And if your original base failed, the excavation depth determines how much new aggregate goes in. A free estimate from us includes a site walk, base assessment, drainage check, and a written line-item quote. Call (877) 752-4194 for an exact number on your Cypress paver project.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well, and we also offer Unilock in La Palma. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Cypress
Can you match the Unilock pavers already on my Cypress tract-home driveway? Yes, we source genuine Unilock pavers from the current production lines and blend them against your existing field. For discontinued colors, we’ll find the closest current run and show you a sample side by side before we install anything.
Why did my Unilock patio pavers start sinking and shifting only a few years after install? Almost always the base. Cypress tract-home patios installed decades ago typically lack proper aggregate depth and compaction, and when the base settles or washes out along the edges, the pavers go with it. We dig out the failed base, re-compact in lifts, set edge restraint, and re-lay the pavers.
Do I need a Cypress city permit to replace my paver driveway or patio? It depends on the scope and the front setback. Cypress City Hall plan review can require permits for hardscape changes within front setbacks or when drainage patterns shift. We handle the permit paperwork as part of the job so you’re not guessing.
What holds up best against Santa Ana winds – Unilock pavers or a poured concrete patio? A properly installed Unilock system holds up just as well as concrete and has an advantage: individual pavers move slightly with soil expansion and contraction, so they’re less prone to the stress cracks that show up in large concrete slabs after dry-summer cycling. The key is the base and edge restraint. Get those wrong, and wind isn’t your real problem. Call (877) 752-4194 and we’ll give you an honest comparison for your specific Cypress lot.
Can you seal my existing Unilock driveway instead of replacing it? If the base is sound and the pavers are intact, sealing and re-sanding is a cost-effective maintenance step. We re-sand with polymeric joint sand, clean the surface, and apply a compatible sealer. If the base is failing, sealing just hides the problem. We’ll inspect and tell you which situation you’re in. Call (877) 752-4194 for a free assessment.
Service Areas Near Cypress
Our Unilock work extends beyond Cypress to nearby Orange County communities and the broader region, including the Cypress service area we cover end to end. We also run Unilock projects in surrounding communities, including Unilock service in Montclair and Unilock service in Upland. If you’re in a neighboring city, call us, we’ll let you know the schedule.
Book Your Unilock Service in Cypress Today
Ready to fix that driveway or build the patio that actually drains right? Call (877) 752-4194 to schedule your free estimate. We’ll walk your Cypress lot, check the base, and give you a written quote with the exact Unilock products specified by name.
Written by Ken Stafford, Owner at Milpitas Construction, serving Cypress, CA, Unilock in Stanton, and the surrounding Orange County tract-home neighborhoods.