Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Marin City, CA | Milpitas Construction
We’re Milpitas Construction, and we install, repair, and re-lay Unilock pavers, walls, and steps across Marin City – independently, not as a factory dealer. What sets our Unilock work apart here is knowing how the marine fog, steep hillside runoff, and the county-island permitting quirks actually affect how a paver performs five and ten years out. Call (877) 752-4194 for a free estimate on any Unilock driveway, patio, or retaining wall in Marin City.
Why Marin City Residents Choose Us for Unilock Service
Most contractors can lay a paver. Few can tell you why Brussels Block joints on the flats below Drake Avenue hold moisture eleven months a year, or why an Olde Quarry retaining wall on a WWII-era cut slope needs geogrid where a flatland wall doesn’t. Ken Stafford, our owner, grew up around the Bay and has spent his career fixing the ways hillside water and marine air quietly wreck exterior work. We’re a full-scope general contractor, which means the same team that rebuilds your paver base can also handle the drainage, the downspout relocation, and the driveway regrade that stops the problem at the source. That’s single-contract accountability, and it matters more in Marin City than in flatter parts of the county. We also carry Unilock sales & service depth that comes from years of installing and repairing these specific product lines, not just reading a catalog.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Marin City
- Fog-driven moss and efflorescence on Brussels Block. Richardson Bay fog keeps paver surfaces damp nearly year-round in Marin City. When joints are filled with unwashed sand instead of proper polymeric sand, they become moss beds, and you’ll see white efflorescence leaching across Brussels Block faces. We pull the old fill, treat the surface, and re-sand with a product that sheds moisture instead of holding it.
- Runoff-scoured paver edges on hillside lots. Homes off Cole Drive and Drake Avenue send storm water downhill fast. Without a toe drain tied into the base, that runoff scours the joint sand out and drops the apron edge. We rebuild these bases with drainage built in, not added on.
- Leaning Unilock Olde Quarry retaining walls. The original cut slopes around Marin City’s war-worker housing were never engineered for today’s wall loads. When Olde Quarry block gets stacked on shallow footings without geogrid, it leans and settles within a few winters. We re-lay these walls with proper reinforcement.
- Chipped Copthorne clay-look pavers from heaving. Copthorne mimics clay brick, which looks great until winter rain and minor frost heave push a tight-laid field up. Edges spall, chips appear, and the driveway shows its age fast. We re-lay over a correctly built base so the surface doesn’t fight the ground beneath it.
- Failing base under sound pavers. This is the one we see most. The pavers look fine, but the driveway or patio has settled an inch or two. The base has failed. We lift the field, rebuild the base, and re-lay your original pavers – you don’t pay for new material you don’t need.
Unilock Service in Marin City: What Local Conditions Mean for Your Pavers
Marin City sits as an unincorporated county island, and that shapes Unilock work in a way nobody in Sausalito deals with. Pull a driveway permit on the flats, and you’re under Marin County jurisdiction. Move a patio job a few hundred feet toward the Sausalito line, and suddenly a different authority reviews it. We scope every lot before we dig, because pulling the wrong permit sets a project back weeks. Add to that the runoff-funnel effect of Cole Drive and Drake Avenue hillsides – storm water that picks up speed over just a few hundred feet – and you get paver bases that fail from below while the surface looks untouched. That’s the Marin City pattern, and it’s why we treat drainage as part of the Unilock installation, not an optional add-on. A homeowner on the flats below Drake Avenue had a Brussels Block driveway that had settled at the apron where hillside runoff hit it every storm. We pulled the settled field, rebuilt the base with a tied toe drain and geogrid, and re-laid the original pavers with fresh polymeric sand. The driveway now sheds winter runoff instead of sinking under it. That’s the difference between laying pavers and engineering them for this specific place.
Unilock Models & Products We Service in Marin City
We install and repair Unilock Brussels Block, the workhorse paver we see on more Marin City driveways than any other. Beacon Hill Flagstone goes on patios and walkways where homeowners want a more natural stone look. For retaining walls on sloped lots, Olde Quarry wall stone does the heavy lifting, and Copthorne gives you that clay-paver look for patios and accents. On the parts side, we use Unilock’s own matching pavers, wall caps, and edging so color and dimension line up – mixing brands on a repair creates a patchwork you’ll notice forever. For geogrid and polymeric sand, we use quality aftermarket products where they outperform the factory equivalent for Marin City’s conditions. We stock common Unilock replacement pavers and edge restraints locally, which speeds up repair turnaround for our Marin City customers.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Marin City
Pricing below reflects what we see across Marin City for Unilock work. Hillside lots with drainage work run toward the higher end; flat-lot re-lays over a sound base land lower.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives cost on a Unilock job in Marin City: whether the existing base can be salvaged, whether hillside drainage needs to be redirected, and how much of the original paver field gets reused. Our free estimate includes a written, line-item breakdown – you’ll know the paver cost, the base cost, and the drainage cost before you sign anything. Call (877) 752-4194 to schedule yours.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Marin City
No. We’re an independent Unilock installer – we source and lay genuine Unilock pavers, walls, and steps, but we’re not affiliated with the manufacturer or operating under a dealer agreement. Our credibility comes from subgrade, drainage, and seismic detailing on Marin County hillside and flatland lots, not a factory badge.
Runoff from Cole Drive and Drake Avenue hillsides hits lower-lying Marin City lots fast during winter rain, and if the patio base isn’t tied to a toe drain, that water scours the joint sand and undermines the paver edges within two or three seasons. We also handle Tiburon Unilock service for similar hillside drainage challenges. We design patio bases here to intercept and shed that water instead of absorbing it. Call (877) 752-4194 and we’ll walk your lot before you commit to anything.
For matching pavers, wall caps, and edging, yes – we use Unilock’s own product so the color and dimension line up with your existing field. For geogrid and polymeric sand, we use quality aftermarket materials where they hold up better in Marin City’s damp, runoff-heavy conditions.
A paver re-lay over a rebuilt base typically runs three to five working days once we’re on site. Full driveway or patio installs run one to two weeks depending on drainage scope. Marin County permitting on the unincorporated side can add lead time, which we factor into your schedule upfront.
If the pavers are sound and the base has failed, we lift the field, rebuild the base, and re-lay your original pavers. We recommend full replacement only when the base has failed beyond repair or the pavers themselves are cracked, spalled, or mismatched. Call (877) 752-4194 for an exact quote on your Marin City property – estimates are free.
Service Areas Near Marin City
Beyond Marin City, our Unilock installation and repair crews serve nearby communities including Sausalito, Mill Valley, and Corte Madera. We also handle Unilock work for clients in San Juan Bautista and Castroville. If you’re on the Marin side of the Golden Gate, we’re close by. See our full Marin City service area.
Book Your Unilock Service in Marin City Today
If your Unilock driveway is settling, your patio joints are washing out, or your retaining wall is leaning, call (877) 752-4194. We also provide Unilock in Chinatown and throughout the Bay Area. We’ll come out, assess the base and drainage, and give you a written estimate with real numbers. Build it right the first time – the Bay Area doesn’t give you a free pass on shortcuts.
Written by Ken Stafford, Owner at Milpitas Construction, serving Marin City and the surrounding Bay Area.