Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Redwood Shores
Redwood Shores homeowners call us when a project has too many moving parts to juggle alone. We’re Milpitas Construction, a full-scope General Contractor team that handles everything from a kitchen tear-out to a lagoon-side room addition under one contract, one draw schedule, and one point of contact. If you’re planning work in the 94065 zip code, call (877) 752-4194 and we’ll walk the site, talk through what your lot actually requires, and give you a written estimate. No runaround, no trade-stacking headache.
Key Takeaways
- Redwood Shores sits on engineered fill over former salt flats, so additions and decks often need a geotechnical report and dewatering plan before permits are even reviewed.
- Lagoon-side and floodplain homes face HOA and city elevation rules that a cheap bid often ignores until inspection stalls.
- We quote real Redwood Shores market prices: home additions run $45,000 – $130,000, ADUs $90,000 – $220,000, roof replacement $8,000 – $20,000.
- Ken Stafford leads every project. One accountable team from roofline to kitchen counter.
Styles & brands we work with
Why Milpitas Construction Is Redwood Shores’s Preferred General Contractor Company
We know what gets built here, and more importantly, what fails here. Redwood Shores homes are mostly 1980s and 1990s wood-frame construction over slab-on-grade or raised foundations. Stucco exteriors, tile roofs, and marine air that never really stops working. Our crews have rebuilt enough fog-rotted walls and corroded flashing assemblies along Redwood Shores Parkway and the lagoon side of town to know exactly what the inspector will flag before you spend a dollar on finish work.
That local knowledge matters. A general contractor who usually works inland in Redwood City or San Carlos may not anticipate that your deck addition needs a dewatering plan because the water table sits a few feet below your slab. We do. And when you call, you get a straight answer, not a callback three days later. Ken Stafford runs this company personally, and he’s the one you’ll talk to when the numbers matter.
Licensed General Contractor in Redwood Shores
A Licensed General Contractor in Redwood Shores is the single accountable company that pulls permits, schedules inspections, hires and manages every trade, and signs the contract for the whole build. Milpitas Construction has been structured exactly this way since day one: we carry the license, we own the schedule, and we don’t point fingers at subs. In Redwood Shores specifically, that license also means we know when a project triggers the fill-and-floodplain review, the geotechnical report, and the dewatering plan that inland jobs never see.
Permit-Ready Scope and Site Work
Any addition, ADU, garage conversion, or even a major deck in Redwood Shores starts with the lot conditions, not the paint color. High water table, engineered fill over former tidal marsh, and lagoon floodplain rules dictate foundation depth, drainage, and exterior material ratings before the first framing nail. We pull the geotechnical and floodplain file up front and write the scope with those costs included, so your permit review doesn’t stall and your inspection sign-off doesn’t get denied over a non-compliant flashing detail.
Storm and Wind-Load Compliance
Redwood Shores sits on the open Bay side of the Peninsula. Wind gusts off the Bay and winter storm cycles hit this community differently than they hit a sheltered lot in Belmont or San Carlos. Your quoted scope needs to name the rated roof assembly, impact window specification, and fastener and flashing materials, in writing. That’s what we do. A cheap bid leaves the load rating out of the line items, and you find out at rough-in.
Residential General Contractor in Redwood Shores
A Residential General Contractor in Redwood Shores handles every phase of a home project under one contract, from demolition and rough-in to finish trim and final inspection. Milpitas Construction covers interiors like kitchen and bath remodels and exteriors like roofing, siding, windows, fencing, hardscaping, and prefab or ADU construction. One company, one draw schedule, one person to call when something needs an answer.
Whole-Project Accountability
We don’t hand you a stack of subcontractor phone numbers and wish you luck. We hire the trades, stage the work, and stand behind the build. If your siding crew is late, that’s our problem to solve, not yours. This is what end-to-end ownership means in practice: the same company managing your roof replacement and your kitchen remodel is the one you call when you want to know why the inspection is scheduled on Tuesday, not Thursday.
Material Selection with a Point of View
We spec materials by name, so you know exactly what’s going into your home. Countertops from Cambria or Caesarstone. Fixtures from Kohler. Cabinetry from KraftMaid. You make the choice with our guidance, not a big-box aisle guess. And because we hold active access to 50+ brand-name product lines, you’re choosing from contractor-grade tiers that hold up in Redwood Shores marine conditions.
Trusted Brands We Service in Redwood Shores
We work with brands that perform in this specific environment. Cambria and Caesarstone quartz stands up to the moisture and humidity that linger around the Lagoon. Kohler fixtures and valves are built for the long haul, and we’ve spec’d enough of them into Redwood Shores bathrooms to know their quirks and service needs. We maintain local parts access for Redwood Shores customers, which means a warranty claim or replacement part doesn’t stall your project waiting on a shipment from across the country.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Redwood Shores Homes
- Fill and water table surprises. Redwood Shores is engineered fill over former salt flats and tidal marsh. Additions, decks, and slab work routinely trigger geotechnical review and dewatering that an inland bid never budgets for.
- Lagoon-side HOA and floodplain friction. Homes along the Redwood Shores Lagoon face strict elevation and exterior material rules. Contractors who skip HOA review pull the wrong permit path and hit a wall at inspection sign-off.
- Fog-driven rot and fastener corrosion. Persistent marine moisture rots stucco and corrodes standard inland fasteners and flashing quickly. We see tile roofs with failing underlayment and corroded fasteners behind the stucco on hillside and lagoon-side homes throughout 94065.
- Undocumented storm repairs. Homeowners who patch storm damage with a handyman get the work done, but there’s no compliance trail. When the insurance claim comes, that repair can be classified as pre-existing. We document everything: permits, materials, loads, photos, inspection sign-offs.
Pricing for General Contractor in Redwood Shores, CA
Redwood Shores prices sit a notch above neighboring Foster City and San Mateo because of the geotechnical and permitting layer that this community’s lots demand. Here’s what our written estimates reflect for this market:
| Project | Redwood Shores Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Roof Replacement | $8,000 – $20,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What pushes a project to the top of a range? A lagoon-side elevation review, a required dewatering plan, premium material tiers from the 50+ brands we carry, and impact-rated window packages. What should never be a surprise? The price once work starts. We write fixed, line-item quotes, and we don’t change the number unless the scope changes in writing. Call (877) 752-4194 for a free estimate calibrated to your specific lot and project.
We Also Serve Cities Near Redwood Shores
Milpitas Construction works throughout the Peninsula. If you’re in Redwood Shores or just across the bridge in Foster City, Belmont, San Carlos, or San Mateo, we’re already running jobs in your neighborhood. Same team, same written scope, same single point of contact.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Redwood Shores
Because Redwood Shores is built on engineered fill over former salt flats and tidal marsh, with a high water table that sits close to the surface. Any structural addition, deck, or slab repair here triggers a geotechnical review and often a dewatering plan before the permit is even accepted for review. That step almost never applies a mile inland in Redwood City or San Carlos, where the native soil drains normally. Call (877) 752-4194 and we’ll tell you during the first walk-through whether your project hits that trigger.
Your quote should name the rated roof assembly, impact window specification, and fastener and flashing materials in writing, because Redwood Shores gets open Bay wind and winter storm cycles that inland homes don’t. A cheap bid skips the load rating, uses standard inland fasteners, and leaves the compliance language out of the contract entirely. You find out at rough-in when the inspector asks for the wind-load calc. We include it in the base scope.
Permits here require a geotechnical and floodplain review for most structural work, then standard building department review, then staged inspections at foundation, rough-in, and final sign-off. If you’re on the lagoon side, the HOA has its own material and elevation review that runs parallel to the city. We handle all of it: pulling the file, scheduling the inspections, and walking the inspector through rough-in before any wall closes. Call (877) 752-4194 if you want the permit path mapped for your specific lot.
Documented compliance is the difference between an approved claim and a denied one. On a lagoon-side townhome off Redwood Shores Parkway, our crew opened a fog-rotted stucco wall and found corroded fasteners and failing flashing where marine moisture had been wicking behind the tile roof for years. We pulled the geotechnical and floodplain file first, rebuilt the waterproofing and flashing assembly to the lagoon-side HOA elevation and material rules, then walked the inspector through rough-in before closing the wall. That documented load and moisture remediation trail later supported the owner’s insurance claim instead of getting classified as pre-existing. If you’re filing a storm claim, the paper trail is worth more than the repair itself.
It should include your geotechnical and floodplain review costs, specific material brands and model numbers, wind-load and impact ratings, permit fees, inspection milestones, and a draw schedule tied to those milestones. If the scope says “roof as needed” or “windows per code,” send it back. Our written scopes name the products and the ratings, and the draw schedule pays against completed inspection points, not vague percentage guesses. Call (877) 752-4194 and we’ll put a scope like that in front of you, free.
Written by Ken Stafford, Owner at Milpitas Construction, serving Redwood Shores and the wider Peninsula since the company’s founding.