Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Stanton
Finding a General Contractor who actually understands Stanton’s housing stock isn’t easy. Most of the homes here are 1950s and 1960s single-story stucco tract builds on tight lots, and they carry decades of patchwork repairs, unpermitted additions, and original galvanized plumbing. That’s the reality we work with every time we take on a project in the 90680 ZIP code. Ken Stafford and the Milpitas Construction team know what’s behind these walls because we’ve opened enough of them. If you’re planning a remodel, addition, or ADU in Stanton, call (877) 752-4194 and we’ll walk the property with you before you spend a dime.
Why Milpitas Construction Is Stanton’s Preferred General Contractor Company
We don’t parachute into Stanton. We’ve done enough work along Beach Boulevard, Katella Avenue, and Cerritos Avenue to know what the city’s building department will flag before they flag it. That matters when a three-week kitchen remodel turns into a legacy code correction because the inspector found a bootlegged garage conversion from 1978. Our reputation here comes from handling those surprises without blowing up the budget or the timeline.
Stanton homeowners call us because we give written line-item quotes, not vague estimates. When we say a room addition runs $45,000 to $130,000, that number includes the compliance work other contractors leave out. We pull permits, pass inspections, and document everything. If you’re in Stanton and want a contractor who treats your project like it’s on their own street, call (877) 752-4194 for a free estimate.
Ken Stafford has built this company around one idea: the homeowner should never be the one coordinating five different trades. Whether it’s a full exterior overhaul or a kitchen remodel, you deal with one accountable team, not a revolving door of subs.
Styles & brands we work with
General Contractor Services in Stanton
General Contractor Services in Stanton means handling the whole job under one contract, from demolition to final paint. For a Stanton homeowner, that typically means kitchen and bath remodels, room additions, garage conversions, or a full prefab ADU on a lot that barely has room for it. Kitchen remodels in Stanton run $14,000 to $45,000 depending on cabinet grade and layout changes. Bathroom remodels land between $9,000 and $28,000. A garage conversion? Budget $30,000 to $80,000 once you factor in the unpermitted work you’ll likely need to legalize.
Interior Remodels and Upgrades
We gut and rebuild kitchens and baths down to the studs when needed, replacing galvanized supply lines and undersized electrical panels as we go. Material selection is guided, not guesswork: you’ll choose from KraftMaid or Wellborn cabinetry, Cambria or Caesarstone tops, and Kohler or Grohe fixtures rather than wandering a big-box aisle. We spec materials by name, so you know exactly what’s going into your home.
Additions, ADUs, and Garage Conversions
Stanton’s small lots mean additions and ADUs require careful setback planning and often a variance conversation with the city. We have direct experience with prefab manufacturers like Abodu, Dvele, and Mighty Buildings, which can dramatically shorten on-site construction time on a tight Stanton lot. Including ADU planning and prefab construction is not a future offering, it’s a current specialty.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Construction Company in Stanton
As a full-scope Construction Company serving Stanton, Milpitas Construction manages exterior work, structural work, and interior finishes under one point of contact. That’s rare. Most firms in Orange County subcontract the exterior to one crew, the interior to another, and the roofing to a third, then leave you to mediate when something goes wrong. We handle roofing, windows, siding, fencing, hardscaping, and interior remodel work with the same accountable team. Roof replacement in Stanton typically runs $8,000 to $20,000 depending on pitch and underlayment requirements.
Exterior Systems and Hardscaping
Between the summer heat and winter rain, Stanton’s exterior materials take a beating. We install James Hardie siding, GAF or CertainTeed roofing systems, and impact-rated windows from Therma-Tru or PGT. For hardscaping, we work with Belgard and Bufftech products, which hold up to Southern California sun better than the bargain alternatives. Paver patios in Stanton run $3,500 to $11,000, and paver driveways $7,000 to $18,000.
Windows, Doors, and Fencing
Impact window installation in Stanton runs $8,000 to $25,000, and that price includes the wind-load ratings the city wants to see on exposed lots. Vinyl fencing through ActiveYards or Bufftech runs $3,500 to $9,000. We don’t stock the cheapest product and call it a day; we install what’ll still be standing after a decade of Stanton sun and Santa Ana winds.
Trusted Brands We Service in Stanton
We have active access to more than 50 brand-name product lines spanning every major trade, and Stanton customers benefit from that depth. Need a Jerith aluminum fence that won’t rust out near the coast? We can spec it. Want a Belgard paver patio that matches the mid-century character of your tract home? Done. From Bufftech vinyl fencing that shrugs off the summer heat to ActiveYards systems that install clean on small lots, we bring contractor-grade options to your door, not whatever the home center happened to stock. Premium brands. Proper installation. One accountable team.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Stanton Homes
- Unpermitted garage conversions and room additions. Decades ago, Stanton homeowners enclosed garages and added rooms without pulling permits. Today, the city inspector will find that work when you pull a permit for a new remodel. We audit for legacy issues before we quote, so you’re not blindsided by a change order mid-project.
- Original galvanized plumbing and outdated electrical panels. Most 1950s and 1960s Stanton homes still run on steel pipes that are rusting from the inside and 100-amp panels that can’t support a modern kitchen. Any remodel touching a wall or a wet area should budget for replacement, and a compliant quote will tell you that up front.
- Poorly flashed flat and low-pitch roofs. Stanton’s mild rainy winters expose bad flashing work fast. When we do an addition or re-roof, we inspect the existing roof-to-wall transitions and correct drainage issues before they leak into your new drywall.
- Wind-load gaps on windows and roof sheathing. Exposed lots in Stanton’s 90680 face real wind exposure off the flat, open grid. Windows and sheathing that only meet minimum California code can fail local inspection and create insurance claim disputes later. We spec to the higher Stanton-area requirement, not the cheapest passable rating.
Pricing for General Contractor in Stanton, CA
Here’s what we’re seeing in Stanton’s market right now. These are real ranges from recent jobs, not national averages:
| Project | Typical Stanton Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Impact Window Installation | $8,000 – $25,000 |
What moves the needle in Stanton specifically is hidden compliance work. A cheap quote for a room addition often omits the cost of legalizing an old unpermitted conversion, upgrading a 100-amp panel, or replacing galvanized supply lines. A Milpitas Construction quote includes those line items up front, with written allowances so you’re never surprised. Call (877) 752-4194 for an exact, line-item estimate. Estimates are free.
We Also Serve Cities Near Stanton
Milpitas Construction regularly works in Stanton and the surrounding Orange County communities of Garden Grove, Cypress, Westminster, and Midway City. If you’re in any of these areas and planning a remodel, addition, or ADU, the same team and the same 50+ brand-name product lines are available to you. One call covers it all: (877) 752-4194.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Stanton
Urban and semi-exposed lots in Stanton’s 90680 need windows rated for at least 100 to 110 mph design wind speed (roughly Exposure B to C, depending on lot orientation and surrounding structures). We spec impact-rated units from PGT or Therma-Tru rather than the minimum-code economy units that pass on paper but fail when a Santa Ana wind event actually tests them. Roof sheathing on exposed corners often requires upgraded nailing patterns and a thicker panel than interior areas, and the city inspector will check. Documented compliance with the higher rating is what protects you if you ever file a storm damage claim. For a quote that includes the right ratings, call (877) 752-4194.
An unpermitted garage conversion or room addition from decades ago will surface when the city inspects your open permit, and it can halt work until the legacy structure is brought into code. That means as-built drawings, load-path correction, electrical and plumbing legalization, and a potentially longer permit review. For insurance, an unpermitted structure is an underwriting or claim denial liability; legalizing it and documenting the correction removes that exposure. Stanton’s small, fully built-out housing stock means this is one of the most common situations we handle. Call (877) 752-4194 and we’ll tell you what a compliance audit of your specific property looks like.
A compliant quote includes the cost of pulling an open permit that covers existing unpermitted work, correcting load-bearing deficiencies found during rough-in, upgrading galvanized supply lines and undersized panels, and bringing any touched assembly up to current wind and seismic code. A cheap bid prices only new square footage and ignores the legacy conditions the inspector will force you to address. Our written line-item quotes include allowances for these corrections, so the change order you get later is the cheap bidder’s surprise, not ours. Call (877) 752-4194 for a fixed, line-item estimate.
We plan additions around setback requirements and lot-line constraints that older Stanton tracts were never designed to accommodate, which often means setback variances, creative framing, and prefab or panelized components that minimize on-site time. For the aging infrastructure piece, we replace galvanized plumbing, upgrade electrical panels, and correct drainage as part of the permit scope, not as an afterthought. Our experience with prefab manufacturers like Abodu and Mighty Buildings means an ADU can be set on a compact Stanton lot far faster than stick-built. Call (877) 752-4194 and we’ll assess your specific lot.
Yes. After a Stanton remodel, documented compliance gives your insurer proof that the structure meets current code, which can prevent premium increases tied to unpermitted square footage and can be the difference between a paid claim and a denial after a wind or storm event. We provide dated photo documentation, inspection sign-off records, and as-built drawings for every project we complete. On a 1950s stucco ranch off Beach Boulevard in Stanton, our crew opened up a wall for a room addition and found the original garage conversion had never been permitted, no shear transfer, undersized headers, and bootlegged wiring. We pulled the as-built into the open permit, corrected the load-bearing and rough-in, and got inspection sign-off on the structural and electrical before closing up. The homeowner later used our documented compliance photos to challenge an insurance premium hike tied to the unpermitted work. If you want that same paper trail, call (877) 752-4194.
From the roofline to the kitchen counter, one contractor, one conversation. Ken Stafford and the Milpitas Construction team are ready to walk your Stanton property, find the legacy issues before the city inspector does, and give you a line-item quote that holds up. Call (877) 752-4194 to schedule your free estimate in Stanton, CA.
Written by Ken Stafford, Owner at Milpitas Construction, serving Stanton since day one of the company’s Orange County expansion.