Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Brookdale, CA | Milpitas Construction
We provide independent CGI cabinetry and millwork service throughout Brookdale (95007), from full kitchen remodels to cabinet refacing and bath vanity installs. The thing that separates our CGI work here from everywhere else is simple: Brookdale’s narrow mountain roads and wet-wall moisture problems change how cabinetry has to be delivered, staged, and installed. We’re Milpitas Construction, led by Ken Stafford, and we’ve worked these hills long enough to know the difference. Call (877) 752-4194 for a free estimate.
Why Brookdale Residents Choose Us for CGI Service
CGI builds a solid cabinet, but no cabinet survives a leaky roof or a settling mountain cabin on its own. We know the Classic and Elite all-wood lines, the ready-to-assemble and assembled series, and the vanity and bath cabinet programs well enough to tell you what’s fixable and what’s past saving. Ken Stafford spent years working around Milpitas and the Santa Cruz Mountains, and he’s the first to say that crooked walls and damp air aren’t excuses, they’re the working conditions. We bring that mindset to every CGI sales & service call in Brookdale.
We’re an independent contractor, not an authorized CGI dealer or factory rep. That matters because we’re not pushed to sell a full replacement when refacing a set of square boxes makes more sense. It also means we spec genuine CGI doors, drawer fronts, and boxes when the finish and series are still available, and we’re just as comfortable recommending quality aftermarket hinges and glides when an OEM part is discontinued or back-ordered for months.
Styles & brands we work with
Common CGI Construction Problems We Solve in Brookdale
- Thermofoil and laminate peeling at the bottom rail. Winter humidity in Brookdale sits against cold exterior walls of old redwood-era cabins, and single-pane windows don’t help. The bottom rails of thermofoil doors blister and lift first, usually on cabinets installed against an exterior wall.
- Door and drawer fronts swelling or delaminating after a leak. When storm-driven rain gets behind siding or a roof edge lets go on a west-facing wall, the moisture hits cabinet boxes before the slope ever dries out. We see swollen, delaminated CGI fronts from this more than any other cause in Brookdale.
- Sagging or out-of-square boxes on settled floors. Older mountain cabins move. Floor framing settles unevenly, and a cabinet box that was square at installation starts to rack, so doors drag and drawers bind against the frame.
- Hinge and drawer-glide failure from repeated moisture cycles. Good CGI hardware still wears out faster when the wall behind the cabinet was never built plumb. The cabinet works against itself every time a door swings or a drawer cycles.
- Vanity cabinet damage in small baths. Brookdale’s older homes have compact bathrooms with poor ventilation. Steam soaks into vanity boxes and edges, and the finish fails from the bottom up.
CGI Service in Brookdale: What Local Conditions Mean for Your Equipment
Brookdale’s private mountain roads and driveways are narrow and winding enough that many full-size delivery trucks can’t reach a job site at all. A CGI cabinet order here often has to be broken down at a pull-off along the main road and shuttled up the hill in a smaller vehicle before it ever reaches the house. That’s not true in Boulder Creek or Felton or anywhere with a wider access. It changes sequencing, it changes what gets staged where, and it changes how we protect finished cabinet faces during the final climb. On a redwood-era cabin off a tight private drive in Brookdale, our crew replaced a water-swollen CGI cabinet run where the thermofoil was peeling off the bottom rails and two door fronts had delaminated from a roof leak. Because the box truck couldn’t make the final climb, we staged the new boxes at the bottom pull-off, shuttled them up in a smaller vehicle, and rehung the cabinets on shimmed, re-squared walls so the doors and drawers finally closed clean. That’s the difference between a contractor who’s worked Brookdale and one who’s just routing through the mountains.
CGI Models & Products We Service in Brookdale
We work on the Classic and Elite all-wood kitchen cabinet series, the assembled and ready-to-assemble lines, and CGI vanity and bath cabinet lines in painted or thermofoil finishes. Our parts approach is practical: we source genuine CGI doors, drawer fronts, and boxes when a matched series or finish is still in production. When the OEM part is discontinued or on back-order, we move to quality aftermarket hinges, glides, and shelf hardware so the job doesn’t stall. On mountainside cabinets, we’re honest about the line. If the boxes are square and the face frames are solid, refacing and new fronts often beat a full teardown. If the boxes are swollen or the floor under the cabin has moved, replacement is the honest call. Build it right the first time because the Bay Area doesn’t give you a free pass on shortcuts.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Brookdale
What you’ll pay depends on whether you’re refacing, replacing a single run, or gutting the whole kitchen. Here’s where Brookdale CGI work typically lands:
| Project | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
Labor, access, and whether the existing boxes can be saved are the three biggest cost drivers. A free estimate includes walking the job, checking wall and floor square, and a written line-item quote. Call (877) 752-4194 to schedule yours.
Serving Brookdale, CA — Our Local Coverage Area
We’re based in the Brookdale area and know this community well, just as we know CGI in Lompico. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Brookdale
Refacing makes sense when the boxes are square, the face frames are solid, and there’s no water damage. Replacement is the honest call when boxes are swollen, the floor has settled, or the thermofoil is failing across multiple doors. We’ll tell you which one applies to your kitchen. Call (877) 752-4194 and we’ll look at the cabinets before quoting either direction.
No. We’re an independent contractor, not affiliated with, authorized by, or endorsed by CGI. That independence means we recommend refacing when it’s the better value and we’re free to source the right parts, OEM or aftermarket, without a factory sales quota shaping the advice.
We source genuine CGI doors, drawer fronts, and boxes when the series and finish are still available. When an OEM part is discontinued or back-ordered, we use quality aftermarket hinges, glides, and shelf hardware so the project doesn’t wait on a supply chain. You’ll know which parts are which before work starts.
Refacing a standard kitchen usually runs a week or less once materials are staged. Full kitchen remodels with cabinet replacement run longer, typically two to four weeks depending on countertop templating and the access constraints of your driveway. In Brookdale, delivery staging and smaller-truck shuttles can add a day, which we plan for from the first site visit. Call (877) 752-4194 for a timeline based on your road and your scope.
A basic hinge, glide, or single-door replacement usually lands in the lower end of the $4,000 – $13,000 cabinet installation range, but most Brookdale jobs are full refacing or replacement, not one-off fixes. The big variable is whether the boxes are square and dry. We’ll quote the exact number after a site visit. Estimates are free at (877) 752-4194.
Service Areas Near Brookdale
We serve Brookdale and the surrounding Santa Cruz Mountains communities. If you’re in San Juan Bautista, Castroville, Prunedale, or Silver Lakes, we can help with CGI cabinet service there too. Check Brookdale service area details, our CGI service in Morgan Hill page, or CGI service in Highlands-Baywood Park for neighboring coverage.
Book Your CGI Service in Brookdale Today
Call (877) 752-4194 to schedule a free estimate for CGI cabinet refacing, replacement, or a full kitchen remodel in Brookdale. We’ll walk the site, check the boxes and the walls, and give you a written line-item quote. We spec materials by name, so you know exactly what’s going into your home.
Written by Ken Stafford, Owner at Milpitas Construction, serving Brookdale, Ben Lomond CGI service, and the Santa Cruz Mountains.