Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Palo Alto, CA | Milpitas Construction
We provide independent Mr-Glass window and glass service across Palo Alto, from Midtown ranchers to new two-story builds. The short version: we repair and replace Mr-Glass sliders, single-hungs, shower enclosures, and patio doors using OEM parts whenever they’re still supported, and we know exactly how Palo Alto’s sun exposure, Eichler-era stock, and design-review process shape every job. We are not an authorized Mr-Glass dealer or manufacturer affiliate. We’re a General Contractor in Palo Alto that works on these units every week. Call (877) 752-4194 for a free estimate.
Why Palo Alto Residents Choose Us for Mr-Glass Service
Ken Stafford, our owner, got his foundation in construction technology at Evergreen Valley College before spending two-plus decades on Bay Area residential work. That matters when you’re dealing with Mr-Glass aluminum sliders that have seen 60 years of Palo Alto grit. We know these frames, their roller tracks, their glazing gaskets, and their failure points because we’ve pulled them apart in Eichlers, ranchers, and new customs alike. We’re the same crew that handles your roof, your siding, and your kitchen remodel, which means one point of accountability when your window job reveals a rot pocket in the rough opening or a slab issue under the sill. Mr-Glass sales & service is a core part of what we do, but we’re honest about when repair makes sense and when replacement is the better call.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Palo Alto
- Flat-spotted rollers on aluminum sliders. Palo Alto’s long dry season puts fine grit into the bottom track. The rollers wear flat, the sash drags, and eventually it jumps the head channel. We replace with stainless rollers, not cheap universals.
- Fogged insulated glass on south and west exposures. Those brutal summer afternoons off Stanford-adjacent lots bake the seal until it fails and the argon escapes. If the frame’s still square, we swap the IGU and keep your windows.
- Vinyl frame distortion and weep-hole clogging. Older Mr-Glass single-hungs take UV for years and the frames can bow slightly. When winter atmospheric-river storms hit, clogged weeps let water back up and stain interior sills.
- Corroded hinges and cracked glazing gaskets on casements. Whistling wind, water tracking into the rough opening. We re-hinge, re-gasket, and re-seal before rot becomes structural.
- Sliding patio doors that jam or derail. Same grit-and-roller problem as the windows, but with a heavier panel and more at stake for security. We true the track and replace rollers and guides before the door becomes a hazard.
Mr-Glass Service in Palo Alto: What Local Conditions Mean for Your Equipment
Here’s the thing a generic Mr-Glass page won’t tell you. In the Eichler tracts like Greenmeadow, radiant heating tubes run directly through the slab, and any trenching near the foundation can sever the loop. Window work on those homes rarely involves trenching, but when we’re pulling a patio door on a raised crawl or re-flashing a sill, we’re scanning before we cut. More immediately, Palo Alto’s design-review process is famously deliberate. Even a like-for-like window replacement in the older single-story core can trigger review if the opening size or glazing changes. That means we measure and match the existing rough openings before ordering Mr-Glass units, so a straightforward sash replacement doesn’t turn into a three-month permit detour. Midtown, Greenmeadow, and south Palo Alto all have streets where the original 1940s-to-1960s openings are a half-inch off modern nominal sizes, and we also handle Emerald Lake Hills Mr-Glass service. We account for that before any order goes in.
Mr-Glass Models & Products We Service in Palo Alto
We work on Mr-Glass aluminum sliding windows, single-hung and double-hung vinyl new-construction units, tempered glass shower enclosures and frameless panels, and the sliding patio door line with roller-and-track hardware. For parts, we use OEM Mr-Glass rollers, hinges, weatherstrip, and replacement IGU sashes whenever the profile is still supported. When OEM parts are discontinued, we source upgraded aftermarket hardware: stainless rollers, better glazing seals. Never a universal roller that’ll flat-spot in two Palo Alto summers. We keep common roller sets, weatherstrip profiles, and glazing gaskets on hand for fast turnaround across the 94303, 94304, and 94306 ZIPs.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Palo Alto
What you pay depends on whether we’re repairing hardware, replacing glass, or pulling the whole unit. Fogged IGU swaps on a Mr-Glass slider cost far less than a full reframe. A full window replacement runs in the range below. Our free estimate includes a written line-item quote, measurements against your existing rough openings, and an honest repair-versus-replace recommendation. No change orders once scope is locked.
| Service | Price Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
Call (877) 752-4194 for an exact quote. Estimates are free.
Serving Palo Alto, CA — Our Local Coverage Area
We’re based in the Palo Alto area and know this community well, including Stanford Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Palo Alto
Yes, if the frame is still square and the profile is supported. We replace the insulated glass unit (IGU) and keep your existing frames. If multiple units on the same wall have failed, full replacement usually makes more financial sense. Call (877) 752-4194 and we’ll tell you straight.
Like-for-like replacements with no change to the rough opening generally don’t need a permit. If you’re changing opening size or glazing area, Palo Alto’s design review can kick in. We measure and match existing openings first so you avoid that trap. Call (877) 752-4194 for specifics on your street.
Grit from Palo Alto’s dry season gets into the bottom track, the rollers flat-spot, and the sash drags. We clean the track, replace rollers with stainless units, and re-balance the sash. It’s the most common Mr-Glass repair we do here. Call (877) 752-4194 to schedule.
Yes. Frameless panels work well in the tighter baths you find in 1950s ranchers and Eichler-era homes, because the absence of a metal frame visually opens the space. We measure for out-of-square walls, because post-war Palo Alto framing is rarely true. Call (877) 752-4194 for a free bath measurement.
The frames handle them fine when weep holes are clear and glazing gaskets are intact. The weak points are clogged weeps on old vinyl single-hungs and cracked gaskets on casements. Both are repairable. Call (877) 752-4194 and we’ll inspect before the next atmospheric river arrives.
Service Areas Near Palo Alto
We serve Palo Alto and the surrounding South Bay area, including Palo Alto service area coverage across 94303, 94304, 94306, and 94309. For projects further out, see Mr-Glass service in Saratoga or Mr-Glass service in Los Altos Hills. We also take calls from San Juan Bautista and Prunedale when the scope fits our schedule.
Book Your Mr-Glass Service in Palo Alto Today
Call (877) 752-4194 for a free Mr-Glass repair or replacement estimate in Palo Alto. Ken Stafford and the Milpitas Construction team build it right the first time. The Bay Area doesn’t give you a free pass on shortcuts.
Written by Ken Stafford, Owner at Milpitas Construction, serving Palo Alto and the South Bay.