Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood Shores, CA | Milpitas Construction
We’re Milpitas Construction, an independent contractor offering Home Remodeling in Redwood Shores with a focus on installing and servicing Mr-Glass shower enclosures and glass products across the area. The short version: we handle Mr-Glass frameless and semi-frameless shower work from first measurement to final caulk bead, and we do it with an understanding of Redwood Shores slab moisture and fill-soil movement that most glass crews never learn. If your Mr-Glass enclosure is binding, leaking, or just looks tired, call (877) 752-4194 for a free estimate.
Why Redwood Shores Residents Choose Us for Mr-Glass Service
We know Mr-Glass the way a mechanic knows a particular engine family. The 3/8-inch and 1/2-inch tempered glass, the Starphire low-iron option, the hinge geometry on the neo-angle corner units. More than that, we know what Redwood Shores does to that hardware. Ken Stafford, our owner, has spent more than two decades building and remodeling on Bay Area fill soils, and he’ll tell you straight: a shower enclosure in Redwood Shores doesn’t fail the same way it does in San Carlos. We’re Mr-Glass sales & service contractors who actually fabricate and fit these systems, not a call center that sublets the work to whoever answers the phone. When you call us, you’re talking to the people who will show up with the glass.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood Shores
- Corroded hinges and binding rollers. Redwood Shores sits against the Bay and the Lagoon, which means fog, salt air, and persistent marine moisture. We routinely see aluminum Mr-Glass door frames and hinges pitted from corrosion, especially on exterior-adjacent bathroom walls. The pivots stiffen, the rollers bind, and eventually the door won’t close without a fight.
- Water infiltration and soap scum etching at the bottom seal. The high water table here isn’t just a foundation issue. Slab wicking pulls moisture up through bathroom floors, which means the bottom seal and curb on a Mr-Glass enclosure stay damp longer than they would on the drier ground a few miles west. That moisture carries minerals and soap residue, etching the glass and breaking down seals prematurely.
- Sagging or racking frameless enclosures. Most Redwood Shores homes are 1980s-to-1990s wood-frame construction on fill. Those houses settle, and when they do, the shower opening shifts slightly. A frameless Mr-Glass panel that was square at install can go out of plane as the framing moves, causing door-to-glass contact and hinge misalignment.
- Edge chipping and hinge-point stress cracks. Slab movement or stud settling puts stress exactly where the hinges clamp the glass. We’ve replaced panels that chipped clean at the hinge point because the house moved a quarter inch after a rainy season. Tempered glass doesn’t flex much, and the hinge is where that stress shows up first.
- Failed caulk joints along the curb and wall. Between the marine moisture and the slab wicking, the caulk line on a Redwood Shores shower works harder than it would inland. When it fails, water gets under the curb, the tile starts to lift, and the enclosure’s bottom track starts corroding from underneath where you can’t see it.
Mr-Glass Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s the thing most people don’t know until they’ve lived through a remodel here: Redwood Shores is built on former salt flats and tidal marsh. The water table is high, the fill is deep, and the drainage is tied directly to the Redwood Shores Lagoon’s water levels. For Mr-Glass shower work, that means the prep matters more than the glass. Before we set a frameless panel near the Lagoon, we check the curb for moisture damage, verify the floor isn’t wicking, and make sure the opening is actually square relative to the current framing, not the original 1990 dimensions. We also have to work within floodplain and HOA elevation rules on lagoon-side properties, which can dictate everything from curb height to waterproofing details before a single permit gets pulled. A glass crew that only hangs panels won’t catch any of that, and the enclosure fails six months later. We’d rather do it right the first time. Build it right the first time, the Bay Area doesn’t give you a free pass on shortcuts.
Mr-Glass Models & Products We Service in Redwood Shores
We install and service the main Mr-Glass lines: the Frameless Shower Enclosure series in 3/8-inch and 1/2-inch tempered, with clear or Starphire low-iron glass; the Semi-Frameless Sliding Shower Door series; the Neo-Angle Corner Shower Enclosure series; and the Fixed Glass Panel and Tub Shield lines. For parts, we source Mr-Glass OEM-compatible hinges, seals, and rollers where tolerances matter, and use quality aftermarket tempered glass and hardware where they meet the same specs without the markup. We keep common Mr-Glass hinge kits, seals, and roller assemblies stocked locally so a Redwood Shores repair doesn’t wait on a freight shipment from the East Coast.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood Shores
Every job gets priced after we look at the actual opening, the condition of the framing, and whether the existing curb can be saved. That said, here’s where most Redwood Shores Mr-Glass work lands:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tile & Fixtures | $800 – $2,500 |
What drives the price in Redwood Shores is mostly the condition of the substrate. If the curb is rotten from years of wicking moisture, that has to come out and get rebuilt before any glass goes in. If the slab has moved, we may need to shim and re-square the opening. Every estimate is free, and it includes a written line-item quote so you know exactly what you’re paying for before we touch anything. Call (877) 752-4194 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well as your local General Contractor in Redwood Shores. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood Shores
No. We’re an independent construction company that installs and services Mr-Glass products. We’re not factory-affiliated or authorized by Mr-Glass. What we bring is hands-on experience fabricating and fitting these systems in Redwood Shores specifically, which means we know the local conditions that cause failures and we source parts intelligently rather than just ordering through a dealer portal.
Both, and we’re upfront about which is which. For hinges, seals, and rollers where the tolerance matters, we use Mr-Glass OEM-compatible parts. For tempered glass and hardware where aftermarket products meet the same specs, we use them and pass the savings along. The decision is made per job, and we tell you what’s going in before the work starts.
A simple glass panel or semi-frameless slider is usually a one-to-two-day job once the glass is cut and tempered. A full walk-in shower with tile and fixtures typically runs one to two weeks, depending on how much substrate repair the moisture and the fill soils have forced on us. Redwood Shores homes often need extra curb or framing work, so we quote timelines after we see the opening, not before.
For most openings, 3/8-inch tempered is the standard and holds up fine. If the shower is large, has a wide door panel, or sits in a bathroom where the framing has moved in the past, we often recommend 1/2-inch. The thicker glass carries more weight and resists the racking and hinge stress that Redwood Shores fill-soil settling can throw at a thinner panel. Call (877) 752-4194 and we’ll measure the opening and tell you what we’d put in our own house.
Track and roller replacement typically falls within our Tile & Fixtures range of $800 to $2,500, depending on the enclosure size and how much of the surrounding tile and seal has to be opened up. If the frame is corroded through or the glass is chipped at a pivot, replacement is the only safe call, and we’ll say so rather than patch it. Call (877) 752-4194 for an exact quote.
Service Areas Near Redwood Shores
We take Mr-Glass calls all over the Peninsula. If you’re in Redwood Shores service area or just outside it, we cover nearby communities including Mr-Glass service in San Carlos, Mr-Glass service in Belmont, and the surrounding Bayfront neighborhoods. If you’re not sure whether we reach you, call and ask.
Book Your Mr-Glass Service in Redwood Shores Today
If your Mr-Glass enclosure is binding, leaking, or showing corrosion, don’t wait until the water gets behind the tile. Call (877) 752-4194 to schedule a free estimate in Redwood Shores. We’ll come out, look at the opening, and give you a written quote with the parts and scope spelled out.
Written by Ken Stafford, Owner at Milpitas Construction, serving Redwood Shores and the surrounding Bay Area.