Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Mount Hermon, CA | Milpitas Construction
We install and repair Mr-Glass shower enclosures throughout Mount Hermon, and we’re independent of the manufacturer. The one thing that separates our Mr-Glass work here is that we build for racked post-and-pier cabins and moisture-heavy redwood lots, not factory-square new construction. Most stock Mr-Glass panels will not drop into a 1950s Mount Hermon cabin bathroom without real wall correction first. Call (877) 752-4194 for a free estimate.
Why Mount Hermon Residents Choose Us for Mr-Glass Service
We know Mr-Glass hardware inside out. Frameless hinged doors, semi-frameless sliders, neo-angle corner units, custom-cut tempered panels. We install off the manufacturer’s published specs, and we keep genuine Mr-Glass hinges, pivots, sweeps, and channel in the truck for most common Mount Hermon service calls. That means less waiting on parts shipped up the hill.
Ken Stafford, our owner, grew up in the Bay Area and has spent two-plus decades on slope-built homes and canyon lots. He’s the one who decided we’d be honest about when a stock enclosure won’t work rather than forcing it in. That candor matters in Mount Hermon where bathrooms shift, floors slope, and the fog drip never really stops.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Mount Hermon
- Stiff doors and water weeping past the sweep. Constant canopy moisture attacks Mr-Glass hinge pins, pivot pins, and channel seals. The door binds, or the sweep lifts just enough to let water run onto the floor. We pull the door, replace the worn hardware with genuine Mr-Glass parts, and re-seal correctly.
- Factory-square panels that no longer plumb. Cabins on posts and shallow slope foundations settle and rack. The Mr-Glass enclosure may have fit five years ago, but now the wall jamb has moved and the door binds at the top corner. We re-set jambs with shims and re-cut sweeps so the glass actually closes.
- Etched or clouded glass panels. Damp, shaded Mount Hermon bathrooms leave mineral and organic film on low-iron and standard tempered glass. Owners often assume the panel is ruined. Sometimes it is. Sometimes a deep clean and re-seal brings it back. We’ll tell you straight which one you have.
- Rot behind the enclosure, not on it. Improperly sealed bottom sweeps and wall channels trap water against redwood framing. The glass looks fine while the wood behind it quietly rots. We check the framing, not just the enclosure, every time we service one.
- Water pooling at the curb. In a racked bathroom, the curb isn’t level and water sits where it shouldn’t. A new sweep alone won’t fix that. We level the curb or re-set the threshold before re-hanging the door, so the sweep actually does its job.
Mr-Glass Service in Mount Hermon: What Local Conditions Mean for Your Equipment
Mount Hermon’s protected redwood root zones are a real constraint, and they affect bathroom work more than people expect. If your Mr-Glass shower replacement requires relocating a drain or re-framing a wet wall, excavation often has to be hand-dug with arborist oversight because of the root-zone ordinance. That slows the job and adds cost compared to the open, sun-exposed lots in Scotts Valley or Felton. On a post-and-pier 1950s redwood cabin near the Mount Hermon conference grounds, we saw this play out directly: the bathroom had racked just enough that a frame-square Mr-Glass neo-angle enclosure wouldn’t close. The door bound at the top corner and water pooled at the curb. We re-set the wall jambs with shims, replaced the worn pivot pins and hinge set with genuine Mr-Glass hardware, re-cut the bottom sweep, and re-sealed against the redwood with a moisture-tolerant sealant. The door swings clean now, and the enclosure stops the fog-season weep that had been soaking the framing.
Mr-Glass Models & Products We Service in Mount Hermon
We install and service the full Mr-Glass lineup: frameless hinged shower doors, semi-frameless sliding enclosures, neo-angle corner units, and custom-cut tempered glass panels with fixed sidelites. Our repair stance is simple: we use genuine Mr-Glass replacement hinges, pivots, sweeps, and channel when the original profile is still supported. When a Mr-Glass part is discontinued, we match quality aftermarket seals and hardware that are dimensionally compatible, not a generic guess. On a glass panel that’s chipped, crazed, or permanently etched, honest replacement beats polishing. But a stiff or leaking enclosure with sound glass usually just needs new hardware and re-sealing.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Mount Hermon
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives cost in Mount Hermon: hand-digging when roots are involved, re-framing a wet wall that’s racked, and whether we’re re-hanging existing glass or cutting new tempered panels. A free estimate includes an on-site look at your framing, your existing enclosure (if any), and a written line-item quote so you know what you’re paying for before we start. Call (877) 752-4194 to schedule one.
Serving Mount Hermon, CA — Our Local Coverage Area
We’re based in the Mount Hermon area and know this community well, and we also provide Lompico Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Mount Hermon
Often not without wall correction. Mount Hermon cabins built on posts and shallow slope foundations rack over time, so a frame-square Mr-Glass panel may not plumb against the wall jamb. We check the opening, the curb level, and the existing framing before recommending any enclosure. If the walls need shimming or the curb needs re-setting, we do that first so the glass actually fits and seals. Call (877) 752-4194 and we’ll measure your opening for free.
The hinges and pivot pins take on constant moisture from fog drip and canopy shade, and they corrode enough to bind the door. Once the door binds, the sweep lifts and water escapes at the curb. We replace the worn hardware with genuine Mr-Glass parts, re-cut the sweep, and re-seal the channel. That usually resolves both the stick and the leak in one visit.
Yes. If the glass is chipped, crazed, or permanently etched, we cut a replacement tempered panel to fit the existing profile. If the glass is sound but the door sticks or leaks, we replace the hardware and seals and leave the panel alone. That keeps the cost down and avoids throwing away good glass.
It can, if the job requires relocating a drain line or re-framing a wet wall that sits near an excavation area. Protected redwood root zones often mean hand-digging and arborist oversight, which adds time and cost. We’ll flag it during the estimate if your project is likely to hit that. Call (877) 752-4194 and we’ll walk your property before you commit.
We seal the bottom sweep and wall channels with a moisture-tolerant sealant before the glass goes in, and we check the redwood framing for soft spots first. If there’s existing rot, we cut it out and repair the framing rather than sealing over it. The goal is a dry wall cavity behind the enclosure, not just a dry bathroom floor.
Service Areas Near Mount Hermon
We run Mr-Glass installations and repairs up and down the San Lorenzo Valley and into the surrounding hills. That includes Felton, Scotts Valley, Ben Lomond, Boulder Creek, and the smaller pockets around Zayante and Lompico. For Mr-Glass work in Burlingame, see Mr-Glass service in Burlingame. For the Felton side of the valley, see Mr-Glass service in Felton. And if you want more detail on the territory we cover, visit our Mount Hermon service area page.
Book Your Mr-Glass Service in Mount Hermon Today
Call (877) 752-4194 and we’ll schedule a free on-site estimate. We’ll measure your opening, check the framing, and give you a written quote so you know exactly what the job will cost before anything starts. Same-day visits are often available for straightforward hardware replacements.
Written by Ken Stafford, Owner at Milpitas Construction, serving Mount Hermon since the early days of the redwood cabin trade.